V-Belt Tensioner
We have the v-belt tensioner you need to get the job done right.
Featured Product
- FENNER DRIVES
- Self-Adjusting Tensioner,A V-belt Size
- Zoro #: G2249414 Mfr #: FS0127
Self-adjusting tensioner, - ANSI Chain Size, A V-Belt Size Range, Idler Outside Dia. 3.0 in, Mounting Hole (In.) 2/5 in, Mounting Hole (Metric) -, Idler Bolt (In.) -, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 30, Normal 10 Deg. Force (Lb.) -, Hard 10 Degree Force (Lb.) -, -, Hard 20 Degree Force (Lb.) -, Normal 20 Deg. Force (Lb.) -, -, Hard 30 Degree Force (Lb.) -, Normal 30 Deg. Force (Lb.) -, -
- FENNER DRIVES
- Self-Adjusting Tensioner,A V-belt Size
- Zoro #: G2249414 Mfr #: FS0127
$68.51
Self-adjusting tensioner, - ANSI Chain Size, A V-Belt Size Range, Idler Outside Dia. 3.0 in, Mounting Hole (In.) 2/5 in, Mounting Hole (Metric) -, Idler Bolt (In.) -, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 30, Normal 10 Deg. Force (Lb.) -, Hard 10 Degree Force (Lb.) -, -, Hard 20 Degree Force (Lb.) -, Normal 20 Deg. Force (Lb.) -, -, Hard 30 Degree Force (Lb.) -, Normal 30 Deg. Force (Lb.) -, -
- View Full Product Details
Shop V-Belt Tensioner
- FENNER DRIVES
- Self-Adjusting Tensioner,V-Belt B,5 In
- Zoro #: G4304991 Mfr #: FS0209
Self-adjusting tensioner, B V-Belt Size Range, Idler Outside Dia. 5.04 in, Outside Dia. (In.) 5 in, Mounting Hole (In.) 2/5 in, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 30, Deflects Up To 45 Degrees Either Side Of Its Neutral Position Allowing A Pretension Force That Self-Adjusts An Idler To Everyday Elongation Of Chain Or Belt While Dampening Vibration In The Drive, Alloy Steel, Accurately Wound Compression Springs Are Used To Provide Consistent Tensioning Force
![FENNER DRIVES Self-Adjusting Tensioner,V-Belt B,5 In FS0209]()
- FENNER DRIVES
- Self-Adjusting Tensioner,V-Belt B,5 In
- Zoro #: G4304991 Mfr #: FS0209
$86.53Self-adjusting tensioner, B V-Belt Size Range, Idler Outside Dia. 5.04 in, Outside Dia. (In.) 5 in, Mounting Hole (In.) 2/5 in, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 30, Deflects Up To 45 Degrees Either Side Of Its Neutral Position Allowing A Pretension Force That Self-Adjusts An Idler To Everyday Elongation Of Chain Or Belt While Dampening Vibration In The Drive, Alloy Steel, Accurately Wound Compression Springs Are Used To Provide Consistent Tensioning Force
- View Full Product Details
- FENNER DRIVES
- Self-Adjusting Tensioner,V-Belt 2-B,4 In
- Zoro #: G4305007 Mfr #: FS0608
Self-adjusting tensioner, 2-B V-Belt Size Range, Idler Outside Dia. 4.0 in, Outside Dia. (In.) 4 in, Mounting Hole (In.) 51/100 in, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 42, Deflects Up To 45 Degrees Either Side Of Its Neutral Position Allowing A Pretension Force That Self-Adjusts An Idler To Everyday Elongation Of Chain Or Belt While Dampening Vibration In The Drive, Alloy Steel, Accurately Wound Compression Springs Are Used To Provide Consistent Tensioning Force
![FENNER DRIVES Self-Adjusting Tensioner,V-Belt 2-B,4 In FS0608]()
- FENNER DRIVES
- Self-Adjusting Tensioner,V-Belt 2-B,4 In
- Zoro #: G4305007 Mfr #: FS0608
$150.53Self-adjusting tensioner, 2-B V-Belt Size Range, Idler Outside Dia. 4.0 in, Outside Dia. (In.) 4 in, Mounting Hole (In.) 51/100 in, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 42, Deflects Up To 45 Degrees Either Side Of Its Neutral Position Allowing A Pretension Force That Self-Adjusts An Idler To Everyday Elongation Of Chain Or Belt While Dampening Vibration In The Drive, Alloy Steel, Accurately Wound Compression Springs Are Used To Provide Consistent Tensioning Force
- View Full Product Details
- POWER DRIVE
- V-Belt Tension Checker
- Zoro #: G0489587 Mfr #: BELT TENSION CHECKER
V-Belt Tension Checker, For Use With 3L, 4L, 5L, A, B, C, D, 3V, 5V and 8V V-Belts 10 in to 170 in up to 35 lb of Tension, Includes Instructions
![POWER DRIVE V-Belt Tension Checker BELT TENSION CHECKER]()
- POWER DRIVE
- V-Belt Tension Checker
- Zoro #: G0489587 Mfr #: BELT TENSION CHECKER
$30.09V-Belt Tension Checker, For Use With 3L, 4L, 5L, A, B, C, D, 3V, 5V and 8V V-Belts 10 in to 170 in up to 35 lb of Tension, Includes Instructions
- View Full Product Details
- LOVEJOY
- Tensioner,Chain/Belt
- Zoro #: G2499761 Mfr #: RT15
Elastomeric Tensioner, 35 ANSI Chain Size, 3L, A, B V-Belt Size Range, Mounting Hole (In.) 5/16 in, Mounting Hole (Metric) M8 x 20, Idler Bolt (In.) 1/2-13 x 2, Temp. Range (F) -40 to 180, Normal 10 Deg. Force (Lb.) 5.6, Hard 10 Degree Force (Lb.) 7.0, 0.67 in, Hard 20 Degree Force (Lb.) 18.2, Normal 20 Deg. Force (Lb.) 14.6, 1.34 in, Hard 30 Degree Force (Lb.) 37.8, Normal 30 Deg. Force (Lb.) 30.4, 1.97 in
![LOVEJOY Tensioner,Chain/Belt RT15]()
- LOVEJOY
- Tensioner,Chain/Belt
- Zoro #: G2499761 Mfr #: RT15
$47.58Elastomeric Tensioner, 35 ANSI Chain Size, 3L, A, B V-Belt Size Range, Mounting Hole (In.) 5/16 in, Mounting Hole (Metric) M8 x 20, Idler Bolt (In.) 1/2-13 x 2, Temp. Range (F) -40 to 180, Normal 10 Deg. Force (Lb.) 5.6, Hard 10 Degree Force (Lb.) 7.0, 0.67 in, Hard 20 Degree Force (Lb.) 18.2, Normal 20 Deg. Force (Lb.) 14.6, 1.34 in, Hard 30 Degree Force (Lb.) 37.8, Normal 30 Deg. Force (Lb.) 30.4, 1.97 in
- View Full Product Details
- FENNER DRIVES
- V-Belt Idler Pulley,A Belt Type,3 In O D
- Zoro #: G0308865 Mfr #: VA3001
A Belt Type, - Shaft Required, Outside Dia. (In.) 3 in, Hub Dia. (In.) -, Face Width (In.) 7/10 in, Bore Dia. (In.) 17 mm, Length through Bore (In.) -, Glass Reinforced Nylon Construction, ABEC 1 6203-2RS Bearings, For Use With Self Adjusting Belt Tensioner
![FENNER DRIVES V-Belt Idler Pulley,A Belt Type,3 In O D VA3001]()
- FENNER DRIVES
- V-Belt Idler Pulley,A Belt Type,3 In O D
- Zoro #: G0308865 Mfr #: VA3001
$12.25A Belt Type, - Shaft Required, Outside Dia. (In.) 3 in, Hub Dia. (In.) -, Face Width (In.) 7/10 in, Bore Dia. (In.) 17 mm, Length through Bore (In.) -, Glass Reinforced Nylon Construction, ABEC 1 6203-2RS Bearings, For Use With Self Adjusting Belt Tensioner
- View Full Product Details
- FENNER DRIVES
- Chain Puller 40-80
- Zoro #: G0671128 Mfr #: 5800500
Chain Puller 40-80
![FENNER DRIVES Chain Puller 40-80 5800500]()
- FENNER DRIVES
- Chain Puller 40-80
- Zoro #: G0671128 Mfr #: 5800500
$65.20Chain Puller 40-80
- View Full Product Details
- OTC
- Belt Tension Gauge,Universal
- Zoro #: G2695822 Mfr #: 6673
Belt Tension Gauge, Universal, Length 8 In, Checks Drive Belt Tension In a Range of 30 to 180 Inch Pounds, Number of Pieces 1
![OTC Belt Tension Gauge,Universal 6673]()
- OTC
- Belt Tension Gauge,Universal
- Zoro #: G2695822 Mfr #: 6673
$142.67Belt Tension Gauge, Universal, Length 8 In, Checks Drive Belt Tension In a Range of 30 to 180 Inch Pounds, Number of Pieces 1
- View Full Product Details
- FENNER DRIVES
- Hot Knife Heating Bit 2In Blade
- Zoro #: G0671119 Mfr #: 5700233
Hot Knife Heating Bit 2In Blade
![FENNER DRIVES Hot Knife Heating Bit 2In Blade 5700233]()
- FENNER DRIVES
- Hot Knife Heating Bit 2In Blade
- Zoro #: G0671119 Mfr #: 5700233
$36.95Hot Knife Heating Bit 2In Blade
- View Full Product Details
- FENNER DRIVES
- Self-Adjusting Tensioner,50 ANSI Chain
- Zoro #: G1927502 Mfr #: FS0567
Self-adjusting tensioner, 50 ANSI Chain Size, Idler Outside Dia. 3.34 in, Mounting Hole (In.) 2/5 in, Mounting Hole (Metric) -, Idler Bolt (In.) -, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 42, Normal 10 Deg. Force (Lb.) -, Hard 10 Degree Force (Lb.) -, -, Hard 20 Degree Force (Lb.) -, Normal 20 Deg. Force (Lb.) -, -, Hard 30 Degree Force (Lb.) -, Normal 30 Deg. Force (Lb.) -, -
![FENNER DRIVES Self-Adjusting Tensioner,50 ANSI Chain FS0567]()
- FENNER DRIVES
- Self-Adjusting Tensioner,50 ANSI Chain
- Zoro #: G1927502 Mfr #: FS0567
$129.82Self-adjusting tensioner, 50 ANSI Chain Size, Idler Outside Dia. 3.34 in, Mounting Hole (In.) 2/5 in, Mounting Hole (Metric) -, Idler Bolt (In.) -, Temp. Range (F) 32 to 225, Force Range (Lbs.) 0 to 42, Normal 10 Deg. Force (Lb.) -, Hard 10 Degree Force (Lb.) -, -, Hard 20 Degree Force (Lb.) -, Normal 20 Deg. Force (Lb.) -, -, Hard 30 Degree Force (Lb.) -, Normal 30 Deg. Force (Lb.) -, -
- View Full Product Details
- FENNER DRIVES
- Keyless Bushing, Shaft Dia. 1.0000 In
- Zoro #: G4965082 Mfr #: 6202240UP
Keyless Bushing, Keyless Bushing Type Single Nut Locking Assembly, Keyless Bushing Series GT, For Shaft Dia. - Bushings 1 in, Outside Dia. 1.75 in, Overall Length 1.875 in, Material - Bushings Steel, Transmissible Torque 292 ft-lb, Shaft Dia. Tolerance +/-0.003, Outside Dia. Tolerance +/-0.003, Transmissible Thrust (Lbs.) 6, 600, Hub Contact Pressure (PSI) 9, 400, Withstand Temp. (Deg. F) Up to 400 Degrees F, Finish Oil Dipped, Agency Compliance ROHS
![FENNER DRIVES Keyless Bushing, Shaft Dia. 1.0000 In 6202240UP]()
- FENNER DRIVES
- Keyless Bushing, Shaft Dia. 1.0000 In
- Zoro #: G4965082 Mfr #: 6202240UP
$98.87Keyless Bushing, Keyless Bushing Type Single Nut Locking Assembly, Keyless Bushing Series GT, For Shaft Dia. - Bushings 1 in, Outside Dia. 1.75 in, Overall Length 1.875 in, Material - Bushings Steel, Transmissible Torque 292 ft-lb, Shaft Dia. Tolerance +/-0.003, Outside Dia. Tolerance +/-0.003, Transmissible Thrust (Lbs.) 6, 600, Hub Contact Pressure (PSI) 9, 400, Withstand Temp. (Deg. F) Up to 400 Degrees F, Finish Oil Dipped, Agency Compliance ROHS
- View Full Product Details
- LOVEJOY
- Tensioner,Chain/Belt
- Zoro #: G1173891 Mfr #: RT18
Elastomeric Tensioner, 35, 40, 41 ANSI Chain Size, Flat Belt Width (In.) 1 in, 2 in, 4L, 5L, B, C V-Belt Size Range, Mounting Hole (In.) 7/16 in, Mounting Hole (Metric) M10 x 30, Idler Bolt (In.) 1/2-13 x 2-1/2, Temp. Range (F) -40 to 180, Normal 10 Deg. Force (Lb.) 16.9, Hard 10 Degree Force (Lb.) 20.9, 0.67 in, Hard 20 Degree Force (Lb.) 50.6, Normal 20 Deg. Force (Lb.) 40.5, 1.34 in, Hard 30 Degree Force (Lb.) 98.2, Normal 30 Deg. Force (Lb.) 78.7, 1.97 in
![LOVEJOY Tensioner,Chain/Belt RT18]()
- LOVEJOY
- Tensioner,Chain/Belt
- Zoro #: G1173891 Mfr #: RT18
$59.99Elastomeric Tensioner, 35, 40, 41 ANSI Chain Size, Flat Belt Width (In.) 1 in, 2 in, 4L, 5L, B, C V-Belt Size Range, Mounting Hole (In.) 7/16 in, Mounting Hole (Metric) M10 x 30, Idler Bolt (In.) 1/2-13 x 2-1/2, Temp. Range (F) -40 to 180, Normal 10 Deg. Force (Lb.) 16.9, Hard 10 Degree Force (Lb.) 20.9, 0.67 in, Hard 20 Degree Force (Lb.) 50.6, Normal 20 Deg. Force (Lb.) 40.5, 1.34 in, Hard 30 Degree Force (Lb.) 98.2, Normal 30 Deg. Force (Lb.) 78.7, 1.97 in
- View Full Product Details
