240 Watt LED Explosion Proof Flood Light, 36,000 Lumens, Class 1 Div 2, 5000K, 100-277V

Product Overview

This 240W LED explosion proof flood light delivers 36,000 lumens at 5000K. It operates on 100-277V power and installs with a yoke mount.

The gray aluminum-alloy housing measures 22.3 by 18.6 by 3.1 inches and weighs 28.6 pounds. A tempered glass lens provides a 120-degree beam angle.

Where This Product Fits Best

This fixture is intended for hazardous-location lighting and oil and gas facility lighting. Its flood distribution supports broad-area illumination where the listed hazardous classifications match site requirements.

Verify area classification, mounting structure, wiring method, and local code requirements before installation.

Performance and Functional Considerations

Output is rated at 150 lumens per watt with a 70+ CRI. The fixture is listed as a replacement for a 1000W metal halide fixture.

The LED system has a 150,000-hour L70 life rating. Electrical performance includes 50/60 Hz operation, power factor above 0.90, THD below 10%, and 10 kV surge protection.

IP66 and IK08 ratings support use where dust, water ingress, and impact exposure are installation considerations.

Safety, Certifications, and Warranty

UL 844, UL 1598 wet-location, and UL 1598A Marine Outside Type listings apply. CSA, ATEX, and IECEx certifications are listed.

Class I, II, and III hazardous-location classifications are specified. Warranty: 5 years.

• Certified for Class I Div 2, Class II Div 1 and 2, and Class III environments; UL 844, UL 1598, CSA, ATEX, and IECEX listed for hazardous, wet, and marine locations.
• Delivers 36,000 lumens at 240 watts with 150 lumens per watt efficiency; suitable for replacing 1000W metal halide fixtures in industrial and marine settings.
• Aluminum alloy housing with tempered glass lens, IP66 and IK08 rated for dust, water, and impact resistance; 10kV surge protection included.