Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1 in Pipe Size, 120VAC, Inline Pilot, PVC, EPDM

The PLAST-O-MATIC PS100EPW11-120/60-PV is a normally closed, 2-way solenoid valve designed for pilot-operated control of fluid flow in industrial systems. Constructed with a PVC body and EPDM seals, compatible with listed liquids (acids, caustics, chlorine solutions, solvents, ultrapure fluids) within the specified fluid temperature maximum of 140°F and ambient temperature maximum of 104°F. It operates with a 120VAC, 60 Hz power supply and includes the coil necessary for actuation. The valve supports horizontal or vertical mounting orientations and features coil enclosure: NEMA 4X rated (watertight and dust-tight); insulation Class F. Rated for operation with corrosive and ultrapure liquids within specified limits (fluid max 140°F, ambient max 104°F) and with PVC body and EPDM seals.

Key Features:

• Valve Type: Inline pilot, diaphragm design
• Valve Position: 2-Position
• Nominal Pipe Size: 1 in
• Orifice Diameter: 1 in
• Operating Pressure Differential: 5 psi minimum, 70 psi maximum (water)
• Fluid Temperature Maximum: 140°F
• Ambient Temperature Maximum: 104°F
• Body Material: PVC
• Seal Material: EPDM
• Electrical Connections: 1/2 in conduit
• Wattage: 11 W
• Coil Enclosure: NEMA 4X rated (watertight and dust-tight); insulation Class F
• Includes Seal and Coil: Yes
• Environmental Rating: Indoor, Outdoor
• NEMA Enclosure Rating: 4X
• Thread Type: NPT (Inlet and Outlet)
• Overall Dimensions: Length 4 in, Width 4 in, Height 7-9/32 in
• Compliance: CSA certified