1-1/4 in. Steel Ball Bearing Sliding Door Roller Assembly (Single Pack)

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 11/16 in. wide and 1-3/16 in. tall with a 7/8 in. dimple width. Used by Lupton and a variety of other patio door manufacturers.

Used by Lupton and a variety of other sliding patio door manufacturers

F-tab housing

1-1/4 in. diameter concave steel roller

Stamped steel housing with ball bearing roller

Mounting tabs on each end

Used on metal framed sliding patio doors

A Phillips head screwdriver is required for installation

For further dimensional information, please see the line drawing