- MFR #
- RPF2AF7
- Zoro #
- G2274596
- UPC #
- 785901572787
- Country of Origin
- China
- Item
- Enclosed Power Relay
- Mounting Style
- DIN Rail & Top Flange
- Electrical Connection
- 1/4 in Tab Terminal
- Base Shape
- Square
- Number of Pins
- 6
- Coil Voltage
- 120V AC
- Current Rating
- 30 A
- Contact Form
- DPST-NO
- Contact Rating (AC)
- 30 A @ 250/277V (NO)
- Contact Rating (DC)
- 20 A @ 28V (NO), 25 A @ 28V (NO)
- Coil Rating
- 4.0VA, 1.7W
- Power Consumption - Relay
- 4.0 VA
- Hz
- 50/60
- Contact Material
- Silver Tin Oxide
- Standards
- CE Certified, CSA C22.2 No 14, EN/IEC 61810-1, GOST, UL 508
- Number of Poles
- 2
- Contact Amp Rating (Resistive)
- 30A @ 277VAC, 20A @ 28VDC
- Features
- Sealed Construction
- Sealing
- Sealed
- Input Voltage
- 96 to 132V
- Response Time
- 25 msec
- Maximum Operating Temperature
- 131 Degrees F
- For Use With
- Hard-Wired Logic Automated Systems
- Series
- Harmony(TM) RPF Power Series
- Horsepower @ 240V AC
- 3 hp
- Horsepower @ 120V AC
- 1 hp
- Electrical Operating Durability
- 100,000
- Frequency
- 50/60 Hz
- Motor Rated
- Yes
- Minimum Operating Temperature
- -40 Degrees F
- Weight
- 2.88 oz
- Resistance Properties
- Shock-Resistant, Vibration-Resistant
- Operating Current
- 20 A at 28V DC (NO UL), 25 A at 28V DC (NO IEC), 30 A at 250V AC (NO IEC), 30 A at 77V AC (NO UL)
- Maximum Switching Voltage
- 250V AC
- Mechanical Operating Durability
- 5,000,000
- Power Consumption
- 4 VA
- IP Rating
- IP40
- Status Indicator
- No Indicator
- Dielectric Strength
- 1,500V AC Between Contacts with Micro Disconnection, 2,000V AC Between Poles with Basic, 4,000V AC Between Coil and Contact with Reinforced
- Push-To-Test Method
- No Button
- Protection Category
- RT II
- Dielectric Voltage
- 2000 V AC between poles with basic || 4000 V AC between coil and contact with reinforced || 1500 V AC between contacts with micro disconnection
- Coil Resistance
- 4250 Ohm at 20°C +/- 15 %
- Switching Voltage
- 250 V IEC
- CAD Available
- Yes
- Test Levels
- Level A group mounting
- Pollution Degree
- 3
- Control Circuit Voltage
- 120 V AC 50/60 Hz
- Drop-Out Voltage Threshold
- Greater than or Equal to 0.15 Uc
- Ambient Air Temperature For Operation
- -40 to 131°F (-40 to 55°C)
- Resistive Rated Load
- 25 A 28 V DC; 30 A 250 V AC
- Control Type
- Without lockable test button
- Series Name
- Power
- Rated Insulation Voltage
- 250 V IEC; 300 V UL
- Shape Of Pin
- Flat
- Shock Resistance
- 10 gnin operation; 30 gnnot operating
- Device Presentation
- Complete product
- Operating Position
- Any position
- Average Resistance
- 4250 Ohm at 68°F (20°C) +/- 15%
- Contact Type and Composition
- 2 NO
- Utilisation Coefficient
- 0.1
- Product Certifications
- UL; CSA; GOST; CE
- Conventional Enclosed Thermal Current
- 25 A -40 to 131°F (-40 to 55°C) relays side by side without a gap; 30 A -40 to 131°F (-40 to 55°C) 13 mm gap between two relays
- Control Circuit Voltage Limits
- 96 to 132 V
- Release Time
- 25 ms
- Operating Rate
- Less than or Equal to 1200 cycles/hour under load; Less than or Equal to 18000 cycles/hour no-load
- Vibration Resistance
- 3 gn +/- 1 mm 10 to 150 Hz)5 cycles in operation; 10 gn +/- 1 mm 10 to 150 Hz)5 cycles not operating
- Rated Impulse Withstand Voltage
- 4 kV 1.2/50 µs
- Ambient Air Temperature For Storage
- -40 to 185°F (-40 to 85°C)
- Operate Time
- 25 ms
- Minimum Recommended Switching Capacity
- 6000 mW 500 mA / 12 V NO
- Average Coil Consumption
- 4 VA 60 Hz
- Maximum Switching Capacity
- 7500 VA/700 W
- Type
- Power
Create Account
