- MFR #
- SR3XT101BD
- Zoro #
- G0263724
- UPC #
- 785901693789
- Country of Origin
- Indonesia
- Item
- Discrete Input/Output Module
- Power Required
- 24V DC
- Number of Inputs
- 6
- Number of Outputs
- 4
- For Use With
- SR3 Logic Relays
- Features
- Simple Programming
- Product Type
- Discrete Input/Output Module
- Standards
- EN/IEC 61000-4-4 level 3 || EN/IEC 61000-4-2 level 3 || EN/IEC 61000-4-3 || EN/IEC 61000-4-12 || EN/IEC 61000-4-11 || EN/IEC 60068-2-6 Fc || EN/IEC 60068-2-27 Ea || EN/IEC 61000-4-6 level 3 || EN/IEC 61000-4-5
- Output Type
- (4) Relay
- Electrical Durability
- AC-15 500000 cycles 230 V, 0.9 A relay output EN/IEC 60947-5-1 || AC-12 500000 cycles 230 V, 1.5 A relay output EN/IEC 60947-5-1 || DC-13 500000 cycles 24 V, 0.6 A relay output EN/IEC 60947-5-1 || DC-12 500000 cycles 24 V, 1.5 A relay output EN/IEC 60947-5-1
- Ambient Air Temperature For Storage
- -40-70°C
- Current State 1 Guaranteed
- >= 1.2 mA IB to IG used as discrete input circuit) || >= 2.2 mA I1 to IA and IH to IR discrete input circuit)
- Overvoltage Category
- III EN/IEC 60664-1
- Tightening Torque
- 0.5 N.m
- Reverse Polarity Protection
- with
- Output Thermal Current
- 8 A for all 4 outputs relay output
- Input Compatibility
- 3-wire proximity sensors PNP discrete input
- Product Certifications
- GL || C-tick || UL || GOST || CSA
- Disturbance Radiated/Conducted
- class B EN 55022-11 group 1
- Switching Capacity In Ma
- >= 10 mA 12 V relay output)
- Voltage State 0 Guaranteed
- <= 5 V I1 to IA and IH to IR discrete input circuit || <= 5 V IB to IG used as discrete input circuit
- Contacts Type And Composition
- NO relay output
- Pollution Degree
- 2 EN/IEC 61131-2
- Backup Time
- 10 years 25°C
- Clock Drift
- 12 min/year 0-55°C
- Input Impedance
- 12 kOhm IB to IG used as discrete input circuit || 7.4 kOhm I1 to IA and IH to IR discrete input circuit
- Mechanical Durability
- 10000000 cycles relay output
- Discrete Input Type
- resistive
- [Uimp] Rated Impulse Withstand Voltage
- 4 kV EN/IEC 60947-1 and EN/IEC 60664-1
- Voltage State 1 Guaranteed
- >= 15 V I1 to IA and IH to IR discrete input circuit || >= 15 V IB to IG used as discrete input circuit
- Output Voltage Limits
- 24 to 250 V AC relay output) || 5 to 30 V DC relay output)
- Discrete Input Number
- 6 EN/IEC 61131-2 type 1
- Counting Frequency
- 1 kHz discrete input
- Relative Humidity
- 95-95 % without condensation or dripping water
- Environmental Characteristic
- EMC directive EN/IEC 61000-6-2 || EMC directive EN/IEC 61000-6-3 || EMC directive EN/IEC 61000-6-4 || EMC directive EN/IEC 61131-2 zone B || low voltage directive EN/IEC 61131-2
- Discrete Input Current
- 4 mA
- Ambient Air Temperature For Operation
- -20-40°C in non-ventilated enclosure IEC 60068-2-1 and IEC 60068-2-2 || -20-55°C IEC 60068-2-1 and IEC 60068-2-2
- Ip Degree Of Protection
- IP20 IEC 60529 terminal block) || IP40 IEC 60529 front panel)
- Discrete Input Voltage
- 24 V DC
- [Us] Rated Supply Voltage
- 24 V DC
- Operating Altitude
- 6561.68 ft (2000 m)
- Supply Voltage Limits
- 19.2-30 V
- Number Or Control Scheme Lines
- 120-120 ladder
- Current State 0 Guaranteed
- <= 0.5 mA IB to IG used as discrete input circuit) || <= 0.75 mA I1 to IA and IH to IR discrete input circuit)
- Maximum Altitude Transport
- 3048 m
- Response Time
- 10 ms from state 0 to state 1)relay output || 5 ms from state 1 to state 0)relay output
- Operating Rate In Hz
- 0.1 Hz at Ie)relay output || 10 Hz no load)relay output
- Connections - Terminals
screw terminals, 1 x 0.25 to 1 x 2.5 mm² AWG 24 to AWG 14) flexible with cable end || screw terminals, 2 x 0.25 to 2 x 0.75 mm² AWG 24 to AWG 18) flexible with cable end || screw terminals, 1 x 0.2 to 1 x 2.5 mm² AWG 25 to AWG 14) semi-solid || screw terminals, 1 x 0.2 to 1 x 2.5 mm² AWG 25 to AWG 14) solid || screw terminals, 2 x 0.2 to 2 x 1.5 mm² AWG 24 to AWG 16) solid
- Product Or Component Type
- discrete I/O extension module
- Cycle Time
- 6-90 ms
- Checks
- Program memory on each power up
- Input Type
- (6) Discrete
- Input Circuit Current - Maximum
- 4 mA
- Output Circuit Current - Maximum
- 8 A
- Wire Connection Type
- Screw Clamp
- Current Rating
- 4 mA
- Mounting Style
- DIN Rail
- Compatible Product Type
- Smart Relays
- Input Circuit Voltage - Maximum
- 24 V DC
- Output Circuit Voltage - Maximum
- 30 V DC, 250 V AC
- Compatible with Brand
- Schneider
- Output Circuit Voltage - Minimum
- 5 V DC, 24 V AC
- Compatible with Series
- SR3, Zelio Logic
- Compatible Series
- SR3, Zelio Logic
Create Account
