Solders (272 items) - Page 5
Zoro # G613771783
Mfr # 53027
Remington Industries
Magnet Wire, Heavy Build Enameled Copper Wire, 15 AWG, 1.0 lb, 100' Length, 0.0603" Diameter, Red
Zoro # G601909990
Mfr # 15HNSP
Zoro # G011820915
Mfr # 61533
Remington Industries
Magnet Wire, 240C, Heavy Build Enameled Copper Wire, 24 AWG, 8 oz, 395ft Length, 0.0227 Dia, Nat
Zoro # G707453441
Mfr # 24H240P.5
Remington Industries
Magnet Wire, Heavy Build Enameled Copper Wire, 40 AWG, 8 oz, 15970' Length, 0.0038" Diameter, Red
Zoro # G101907144
Mfr # 40HNSP.5
Zoro # G700537407
Mfr # 53500
Remington Industries
Magnet Wire, 240C, Heavy Build Enameled Copper Wire, 22 AWG, 2 oz, 63ft Length, 0.0281 Dia, Nat
Zoro # G107453706
Mfr # 22H240P.125
Zoro # G514657797
Mfr # 53176
Zoro # G713771997
Mfr # 53014
Remington Industries
Magnet Wire, Enameled Copper Wire, 27 AWG, 5.0 Lbs, 8005' Length, 0.0151" Diameter, Red
Zoro # G101908059
Mfr # 27SNS
Remington Industries
Magnet Wire, Heavy Build Enameled Copper Wire, 19 AWG, 2.5 lb, 627' Length, 0.0386" Diameter, Red
Zoro # G801908397
Mfr # 19HNS2.5
Zoro # G011821295
Mfr # 38061
Remington Industries
Magnet Wire, Enameled Copper Wire, 17 AWG, 2.5 Lbs, 399' Length, 0.0469" Diameter, Red
Zoro # G701911916
Mfr # 17SNS2.5
Remington Industries
Magnet Wire, Enameled Copper Wire, 38 AWG, 2.5 Lbs, 49880' Length, 0.0044" Diameter, Natural
Zoro # G501909762
Mfr # 38SNS2.5
Remington Industries
Magnet Wire, 240C, Hvy Build Enameled Copper Wire, 22 AWG, 2.5 lb, 1254ft Length, 0.0281 Dia, Nat
Zoro # G207454276
Mfr # 22H2402.5
About Solders
Electronic technicians use soldering irons and solder for things like computers, medical equipment and precision measurement systems. There are 2 main types of solder: lead based and lead free. Because of concerns around disposal of electronic items, lead free solder is often used however they do melt at higher temperatures and require a higher dwell time. Leaded solder is an obvious health hazard because the lead can rub off onto your fingers and be ingested through the skin. Before you start soldering, make sure you have flux on hand to clean the solder joints.
































