Shaft Support Block, 1.000 In Bore

THOMSON| Zoro #: G0770427| Mfr #: FSB16

$100.50 /ea

This item ships free. Details.Standard ground shipping.
Body Width (In.): -
Overall Length (In.): -
Dimension D: 1.250"
Save 15%. Sign up for Z-mail.


Zoro #: G0770427 Mfr #: FSB16
Body Width (In.): -Overall Length (In.): -
Dimension D: 1.250"Type: Flanged
Mounting Hole (In.): 0.266Dynamic Load Capacity (N): -
Dimension O: -Dimension J: -
Flange Thickness (mm): -Dimension V (In.): -
Dimension L (In.): -Steady State Speed: -
Dimension M (In.): -Dimension E: 0.625"
Mounting Hole Dia. (In.): -Dimension V: -
Slot Width (mm): -Dimension S: -
Finish: -Dimension Dp: -
Body Width (mm): -Item: Shaft Support Block
Dimension A1 (In.): -Dimension G1: -
Flange Dia. (mm): -Steady State Speed - Continuous Dry: -
Retaining Ring: -Dimension E2: -
Temp. Range (F): -Dimension Z: -
Dimension A2 (In.): -Dimension N Dia. (In.): -
Dimension H2: -Dimension N: -
Overall Width (In.): -Static Load Capacity (Lb.): -
Dynamic Load Capacity (Lb.): -Dimension F1: -
Mounting Hole Center (mm): -Dimension Y: -
Dimension H (In.): -Material: -
Overall Height (mm): -Seal: -
Dimension B: 1.380"Slot Width (In.): -
Barrel Dia. (mm): -Overall Height (In.): -
Dimension I: 0.310"Mounting Hole Center (In.): -
Width: -Flange Thickness (In.): -
Color: -Dimension F: 1.500"
Dimension X: -Dimension H1 (In.): -
Dimension G1 (In.): -Dimension G: 0.266"
Dimension N2 (In.): -Liner: -
Dimension H: -Dimension A: 2.750"
Overall Width (mm): -Self-Alignment: -
Includes: -Accelerated Speed: -
Bore Dia. (mm): -Mounting Surface to Shaft Center (In.): -
Dimension E1 (In.): -Dimension A1: -
Barrel Dia. (In.): -Bolt Size: -
Dimension R: -Bore Dia. (In.): 1.000
Shaft Dia. (In.): 1.000Mounting Hole Dia. (mm): -
Dimension K: -For Use With: -
Steady State Speed - Intermittent Dry: -Lubrication: -
Flange Dia. (In.): -Overall Length (mm): -
Mounting Bolt (In.): 1/4Dimension H1: -
Locking Type: -Dimension N3: -
Dimension S (In.): -Dimension d: -
Height: -Static Load Capacity (N): -
Slot Angle (Degrees): -Mounting Surface to Shaft Center (mm): -
Dimension N2: -Agency Compliance: -
Dimension P: -Dimension A2: -
Max. Pv: -Dimension C: 2.125"
Dimension E1: -Dimension F1 (In.): -
Country of Origin (subject to change): Mexico


Flanged Shaft Support Block, Shaft Diameter 1.00 Inch, Mounting Bolt 1/4 Inch, Mounting Hole 0.266 Inch, For Linear Race Shaft, Not for Use with Open Type Ball Bushing Bearings