Item
|
Smart UPS
|
UPS Type
|
Line Interactive
|
Power Rating
|
1.05 kVA
|
Mounting
|
Tower/Wall
|
Wattage
|
705 W
|
Input Voltage
|
120V AC
|
Output Voltage
|
120V AC
|
Backup Time (Half/Full Load)
|
23 min/8 min
|
Outlet Type
|
UPS/Surge
|
Medical Grade
|
No
|
Number of Outlets
|
6
|
Green Environmental Attribute
|
Product Contributes To Reducing Energy Consumption
|
Special Features
|
AVR Corrects Brownouts and Overvoltages, Power Management Software, Pure Sine Wave Output
|
Fax/Modem Line Protection
|
No
|
Transfer Time
|
2 to 4 msec
|
Hz
|
60 Hz
|
Standards
|
CSA, FCC Part 15 Category B (EMI), NOM, UL 1778
|
Includes
|
PowerAlert Unattended Shutdown and UPS/Power Monitoring Software, USB Monitoring Cable
|
Footnotes
|
4,12
|
Input Current
|
6.7 A
|
Display Type
|
LED
|
Automatic Volts Regulation
|
Yes
|
Ports
|
USB
|
NEMA Receptacle Configuration
|
5-15R
|
NEMA Plug Configuration
|
5-15p
|
Phase
|
1
|
Capacity - Batteries
|
1050 VA
|
Input Connection
|
6 ft Cord with NEMA 5-15P Plug
|
Relative Humidity
|
0 to 95%, non-condensing
|
Operating Temperature Range
|
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
|
Output AC Waveform (AC Mode)
|
Sine wave
|
Battery Access
|
Battery access door
|
UPS Housing Material
|
Polycarbonate
|
EMI / RFI AC Noise Suppression
|
Yes
|
Alarm Cancel Operation
|
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
|
PowerAlert Software
|
For local monitoring via the UPSâ„¢s built-in USB port, download PowerAlert Local software at http://www.tripplite.com/poweralert
|
Installation Form Factors Supported with Optional Accessories
|
Wallmount (UPSWM - tower mounting kit)
|
UPS AC Suppression Joule Rating
|
480
|
Output Volt Amp Capacity (VA)
|
1050
|
Rated input current (Maximum Load)
|
6.7A
|
Output Receptacles
|
(6) 5-15R
|
Voltage Regulation Description
|
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147
|
Internal UPS Replacement Battery Cartridge
|
RBC52 (quantity 3)
|
Individually Controllable Load Banks
|
No
|
Input Circuit Breakers
|
12A
|
Nominal Input Voltage(s) Supported
|
120V AC
|
Output AC Waveform (Battery Mode)
|
PWM sine wave
|
Output Voltage Regulation (Line Mode)
|
-18%, +8%
|
AC Suppression Response Time
|
Instantaneous
|
Output kVA Capacity (kVA)
|
1.05
|
Input Phase
|
Single-Phase
|
Battery Replacement Description
|
Hot-swappable, user replaceable batteries
|
Audible Alarm
|
Audible alarm indicates power-failure and low-battery conditions
|
Communications Cable
|
USB cable included
|
WatchDog Compatibility
|
Supports Watchdog application, OS and hard-reboot restart options for remote applications
|
Low Voltage Transfer to Battery Power (Setpoint)
|
75
|
Nominal Output Voltage(s) Supported
|
110V; 115V; 120V
|
Installation Form Factors Supported with Included Accessories
|
Tower
|
Output Watt Capacity (Watts)
|
705
|
LED Indicators
|
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
|
AC Suppression Joule Rating
|
480
|
UPS Input Connection Type
|
5-15P; Right-Angled
|
Recommended Electrical Service
|
15A 120V
|
Severe Undervoltage Correction
|
Input voltages between 75 and 92 are boosted by 30%
|
Battery Recharge Rate (Included Batteries)
|
Less than 4 hours from 10% to 90% (typical, full load discharge)
|
Overvoltage Correction
|
Input voltages between 128 and 147 are reduced by 12%
|
AC Mode Efficiency Rating (100% Load)
|
0.96
|
Network Monitoring Port Description
|
Supports detailed monitoring of UPS and site power conditions
|
Cold Start (Startup in Battery Mode During a Power Failure)
|
Cold-start operation supported
|
Output Voltage Regulation (Battery Mode)
|
+/- 5%
|
UPS AC Suppression Response Time
|
Instantaneous
|
Nominal Voltage Details
|
120v nominal output in battery mode
|
Storage Temperature Range
|
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
|
Frequency Compatibility
|
60 Hz
|
Communications Interface
|
USB
|
High Availability UPS Features
|
Hot swappable batteries
|
Expandable Runtime
|
No
|
Undervoltage Correction
|
Input voltages between 93 and 107 are boosted by 14%
|
Switches
|
2 Switches control off/on power status and alarm-cancel/self-test operation
|
UPS Certifications
|
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category B (EMI)
|
High Voltage Transfer to Battery Power (Setpoint)
|
147
|
Primary Form Factor
|
Tower
|
DC System Voltage (VDC)
|
18
|
Load Capacity
|
1050 VA
|
Plug/Connector Type
|
NEMA 5-15P
|
Network Management
|
SNMP Manageable
|
Typical Battery Recharge Time
|
4 Hour
|
Product Name
|
SmartPro 1050VA Tower UPS
|
Serial Port
|
Yes
|
Product Line
|
SmartPro
|
Receptacle Detail
|
6 x NEMA 5-15R
|
Form Factor
|
Tower
|