2 Switches control off/on power status and alarm-cancel/self-test operation
UPS AC Suppression Joule Rating
940
Undervoltage Correction
Input voltages between 96 and 106 are boosted by 10%
Output Isolation Transformer
Hospital grade load isolation transformer
Battery Replacement Description
Hot-swappable, user replaceable batteries
Communications Cable
USB and DB9 serial cabling included
Operating Temperature Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Audible Alarm
Factory-muted audible alarm indicates power-failure, overload and low-battery conditions
Cold Start (Startup in Battery Mode During a Power Failure)
Cold-start operation supported
AC Mode Efficiency Rating (100% Load)
0.94
Package Contents
SmartPro 1200XLHG UPS, SMART 1200XLHG Medical Grade Tower UPS System, PowerAlert Software and cabling, Warranty information, Instruction manual
Hot Swappable
Yes
Maximum Operating Temperature
104°F (40°C)
Additional Information
Ideal UPS protection for applications in medical patient-care areas where UL 2601-1 listed medical electrical equipment is required, Maintains less than 300 microamps leakage current for UPS and all connected equipment, Built-in isolation transformer with faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes, Provides connected equipment with continuous power during short and long duration loss of commercial power, Expandable runtime is available with the addition of one or more external battery packs (part# BP36V27), Line-interactive voltage regulation corrects brownouts and overvoltages from 81 to 143 volts back to usable 120V output levels, without using battery power, Hospital-grade plug and outlets offer added degree of safety and reliability to input/output connections, Full line isolation prevents shock potential and operational problems in sensitive electronic equipment, Resistant to electrostatic discharge, Supports loads up to 1000VA / 750 watts, 34 minutes half load runtime (500VA/375 watts), 16 minutes full load runtime (1000VA/750 watts), 4 protected hospital-grade outlets; 6-ft. cord, 1-RS-232 and 1-USB serial port for network interface; SNMP compatible, SNMP compatible with separate purchase SNMPWEBSOLO ethernet adapter accessory, Complete surge protection, line isolation and EMI/RFI noise filtering, 2 year product warranty, PowerAlert unattended shutdown software and complete cabling included, 5 diagnostic LEDs indicate AC present, on battery, voltage correction, overload & battery low/replace, Battery replacement door, Back panel grounding lug
Network Management
SNMP Manageable
Load Capacity
1000 VA/750 W
Status Indicators
Includes 5 front-panel indicator LEDs to show battery charge level, AC line voltage levels, automatic voltage regulation status, UPS load level and replace battery warning
Alarm
On Battery, Low Battery, Overload
Form Factor
Tower
Battery Chemistry
Valve Regulated Lead Acid
Battery Life
6 Year
Typical Battery Recharge Time
4 Hour
USB
Yes
UPS Applications
Hospital/Medical
Output Capacity (Watts)
750
Product Compliance
FCC Part 15 Class A (USA)
Product Certifications
CSA (Canada); UL 1778; UL 60601-1
Installation Form Factors Supported with Included Accessories
UPS System, Line Interactive, Power Rating 1 kVA, Wattage 750 W, Input Voltage 120V AC, Output Voltage 115V AC, 120V AC, Backup Time (Half/Full Load) 27.5 min/11 min, Mounting Tower/Wall, Outlet Type UPS/Surge, Number of Outlets 4, Medical Grade Medical Grade Approved, NEMA Receptacle Configuration 5-15R, NEMA Plug Configuration 5-15P, Automatic Volts Regulation Yes, Fax/Modem Line Protection No, Transfer Time 2 to 4 msec, Width 8 in, Depth 9 in, Height 13 in, Cord Length 6 ft, Display Type LED
