Black HDPE Sheet Stock 12" L x 12" W x 0.063" Thick

The ZORO SELECT - 1ZAU5 is a Sheet Stock plastic sheet, available in the color black. This product is intended for potential industrial applications and can be cut, shaped, or molded into different forms depending on project requirements. The material used in its construction is HDPE (High-Density Polyethylene), known for its durability and versatility.

• Corrosion and Chemical Resistance: The sheet is characterized by its resistance to corrosion and chemicals, which may make it a consideration for certain industrial applications where exposure to these substances is possible.
• Friction Coefficient & Rating: With a measured friction coefficient of 0.2, the product's relative slipperiness indicates that it might have less resistance when interacting with other surfaces.
• Impact Strength & Rating: Despite having an impact strength rating classified as 'poor', it still possesses an impact strength of 1.30 ft-lb/in which indicates how much energy the material can absorb before breaking.
• Machinability: This plastic sheet has been found compatible with standard industrial tools under typical usage scenarios; however, care should always be taken not to cause damage.
• Temperature Range: It is rated for operation within specified temperature ranges (-58 Degrees F to 176 Degrees F), but actual performance can depend on specific conditions.
• Tensile Strength & Rating: While its tensile strength rating is classified as 'poor', the product's measured tensile strength value stands at approximately 4,600 psi. This suggests potential resilience under stress but does not guarantee prevention of breakage under all circumstances