- MFR #
- 2YER6
- Zoro #
- G1460374
- UPC #
- 190735238455
- Country of Origin
- India
- Item
- Centrifugal Pump
- HP
- 3/4 hp
- Housing Material
- Polypropylene
- Phase
- Three
- Voltage
- 208-230/460
- Max. GPM @ Head
- 37 gpm @ 10 ft
- Max. Head
- 72 ft
- Inlet
- 1-1/2 in NPT
- Best Efficiency GPM @ Head
- 24 gpm @ 41 ft
- Outlet
- 1-1/2 in NPT
- Motor Enclosure
- Open Drip Proof
- Seal Material
- Buna-N, Carbon, Ceramic, Stainless Steel
- Hz
- 60
- Max. Liquid Temp.
- 140 Degrees F
- Max. Specific Gravity
- 1.0
- Max. Case Pressure
- 100 psi
- Drain Plug
- Yes
- Duty
- Continuous
- Max. Fluid Viscosity
- 100 SUS
- GPM of Water @ 50 Ft. of Head
- 18
- Best Efficiency Range GPM @ Head
- 18 to 33 gpm @ 50 to 20 ft
- Inlet Pressure
- 75 psi
- Motor RPM
- 3,450 RPM
- Wetted Materials
- Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel
- Impeller Type
- Closed
- Min. GPM @ Head
- 6 gpm @ 65 ft
- Volute Material
- Polypropylene
- GPM of Water @ 40 Ft. of Head
- 24
- GPM of Water @ 20 Ft. of Head
- 33
- GPM of Water @ 30 Ft. of Head
- 29
- GPM of Water @ 15 Ft. of Head
- 35
- GPM of Water @ 60 Ft. of Head
- 10
- Port Rotation
- None
- Impeller Material
- Polypropylene
- NEMA/IEC Frame
- 56J
- GPM of Water @ 10 Ft. of Head
- 37
- Shaft Material
- Stainless Steel
- Includes
- Manual
- GPM of Water @ 70 Ft. of Head
- 2
- Application
- Aggressive Liquid Applications, and Other General Purpose Pumping, Booster Service, Irrigation, Jockey Pump Service, Moderate Flow at Moderate Head Pressure, Spraying Systems, Transfer of Non-Flammable Liquids, Water Circulation
- Service Factor
- 1.5
- Screw Material
- Stainless Steel
- Amps
- 2.7-2.5/1.2
- GPM of Water @ 25 Ft. of Head
- 31
- Agency Compliance
- c UL us
- Seal Type
- Mechanical
- Bearing Type
- Ball
- Standards
- UL Recognized Motor
- Impeller Design
- Closed
- Feet of Head (Maximum)
- 72 ft
- Flow Rate @ 25 ft of Head (Maximum)
- 31 gpm
- Ambient Temperature (Maximum)
- 104 Degrees F
- Discharge Pipe Type
- NPT
- Flow Rate @ 20 ft of Head (Maximum)
- 33 gpm
- Best Efficiency Flow
- 24 gpm
- Wetted Material
- Buna-N, Carbon, Ceramic, Polypropylene, Stainless Steel
- Motor Speed (Maximum)
- 3,450 RPM
- Flow Rate @ 40 ft of Head (Maximum)
- 24 gpm
- Frequency
- 60 Hz
- Current
- 2.7 to 2.5 or 1.2 A
- Nameplate Voltage
- 230/460V AC
- Flow Rate @ 15 ft of Head (Maximum)
- 35 gpm
- Flow Rate @ 10 ft of Head (Maximum)
- 37 gpm
- Specific Gravity (Maximum)
- 1
- Viscosity (Maximum)
- 100 SUS
- Case Pressure (Maximum)
- 100 psi
- Intake Pipe Type
- NPT
- Flow Rate @ 30 ft of Head (Maximum)
- 29 gpm
- Flow Rate (Minimum)
- 6 gpm
- Horsepower (Maximum)
- 3/4 hp
- Compatible Motor Frame
- 56J NEMA
- Priming
- Manual
- Best Efficiency Head
- 41 ft
- Discharge Rotation
- None
- Duty Cycle
- Continuous
- Flow Rate (Maximum)
- 37 gpm
- For Use With Potable Systems
- No
- Media Temperature (Maximum)
- 140 Degrees F
- Shut Off Pressure (Maximum)
- 72 ft of head
- Electrical Connection Type
- Hardwired
- Flow Rate @ 10 ft of Head - Maximum
- 37 gpm
- Hazardous Location Class
- Not Rated
- Inlet Orientation
- Side
- Ambient Temperature - Maximum
- 104 Degrees F
- Pump Housing Material
- Plastic
- Feet of Head (Minimum)
- 10 ft
- Pumping Application
- Booster Services, Irrigation, Jockey Pump Services, Spraying Systems, Water Circulation
- Case Pressure - Maximum
- 100 psi
- Flow Rate @ 50 ft of Head (Maximum)
- 18 gpm
- Number of Stages
- 1
- Motor Speed - Maximum
- 3,450 RPM
- Media Temperature - Minimum
- 40 Degrees F
- Shaft Seal Material
- Buna-N, Carbon/Ceramic, Stainless Steel
- Thermal Overload Protection
- Yes
- Discharge Position
- Offset
- Shut Off Pressure - Maximum
- 31.1 psi
- Mounting Orientation
- Horizontal
- Chemical Compatibility
- Non-Flammable Liquids
- Discharge Orientation
- Top
- Media Temperature - Maximum
- 140 Degrees F
- Discharge Rotation Increments
- 0 Degrees
- Shaft Seal Type
- Mechanical
- Motor Design
- Three-Phase
- Inlet Position
- Center
- Drive Coupling Type
- No Coupling
- Full Load Current
- 2.5/1.2 A
- Horsepower
- 3/4 hp
Create Account
