Effluent Pump, Submersible, 4/10 HP

DAYTON| Zoro #: G0660423| Mfr #: 2JGA2

$497.59 /ea

This item ships free. DetailsStandard ground shipping

Technical Specifications

Zoro #: G0660423 Mfr #: 2JGA2
Item: Submersible Effluent PumpSwitch Type: Tether
Impeller Material: Stainless SteelItem: Submersible Effluent Pump
HP: 4/10Voltage: 115V
Amps: 11Shaft Seal: CRB/CMC/Buna N/SS
GPM of Water @ 5 Ft. of Head: 85GPM of Water @ 10 Ft. of Head: 70
GPM of Water @ 20 Ft. of Head: 52GPM of Water @ 15 Ft. of Head: 63
GPM of Water @ 25 Ft. of Head: 38GPM of Water @ 30 Ft. of Head: 22
Phase: 1Thermal Protection: Thermal Protection
Duty: IntermittentMotor Type: Oil Filled
Bearing Type: BallIncludes: 2" 90 Deg Elbow
Cord Length: 20"Top Material: Stainless Steel
Width: 11-1/32"On Point: 11-1/2"
Off Point: 4-1/4"Motor RPM: 3450
Agency Compliance: CSA, ULBase Material: Stainless Steel
Max. Head: 32 ft.Pump RPM: 3450
Length: 16-15/16"Discharge NPT: 2"
Min. Sump Pit Dia.: 18"Height: 16-3/4"
Max. Liquid Temp.: 130 Degrees FHz: 60
Max. Dia. Solids: 1-1/2"Housing Material: Stainless Steel
Diameter: 6-1/2"Handle: yes
Country of Origin (subject to change): China

Product Description

Submersible Effluent Pump, Automatic Operation Type, 4/10 HP, Tether, Base Material Stainless Steel, Housing Stainless Steel, Top Material Stainless Steel, SS, Impeller Material Stainless Steel, 115V, 11 Amps, Height 16-3/4 In., 6-1/2 In. Diameter, Cord Length 20 In., Discharge NPT 2 In., Shaft Seal CRB/CMC/Buna N/SS, Max. Dia. Solids 1-1/2 In., GPM of Water @ 10 Ft. of Head 70, Max. Head 32 ft., Max. Temp. 130 Degrees F, 1 Phase, Bearing Type Ball, Includes 2 In. 90 Deg Elbow

Product Reviews