Shop DAYTON

Turbine Pump, 3/4 HP, 115 to 230V, 3450 rpm

  • Mfr # 53EC04

  • Zoro # G2042877

product price:  $580.99
/ea
Free Shipping & Returns

Key Features

HP
3/4 hp
Voltage
115/230
Wetted Materials
316 Stainless Steel, Bronze, Buna-N, Carbon, Cast Iron, Ceramic
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
See all product information
Get a 10% off coupon
Free 30-day returns Return Policy
Get 30 days to pay with Net 30 Apply Now
Unlock tax-exempt savings Add Tax Exemption

Specifications

Product Information

MFR #
53EC04
Zoro #
G2042877
UPC #
190735938089
Country of Origin
India

Dimensions

Width
6 3/4 in
Height
7 1/2 in
Max. Dia. Solids
0.25 Microns
Manufacturers Warranty Length
1 yr
Compatible Discharge Pipe Size
1 in
Overall Width
6.75 in
Overall Height
7.5 in
Compatible Intake Pipe Size
1 1/4 in
Manufacturer Warranty Length
1 yr
Solid Diameter (Maximum)
0.25 micron
Inlet Diameter
1 1/4 in
Motor Frame Size
56J
Discharge Diameter
1 in

Details

HP
3/4 hp
Voltage
115/230
Wetted Materials
316 Stainless Steel, Bronze, Buna-N, Carbon, Cast Iron, Ceramic
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
Item
Turbine Pump
Motor RPM
3,450 RPM
Pump RPM
3,450
GPM @ 80 PSI
5.5
Best Efficiency GPM @ Head
6.0 @ 75 psi
Bearing Type
Ball
GPM @ 10 PSI
7.6
Max. Liquid Temp.
230 Degrees F
GPM @ 50 PSI
6.4
Motor Type
Capacitor-Start/Run
Hz
60
Max. Specific Gravity
1
Agency Compliance
UL Listed
Thermal Protection
yes
Frame
56J
Amps
11.3/5.6
Outlet
1 in FNPT
Overload Protection
yes
GPM @ 75 PSI
5.7
Duty
Continuous
Impeller Type
Regenerative Turbine
Inlet (In.)
1-1/4 FNPT
GPM @ 40 PSI
6.8
Phase
Single
Port Rotation
90 Degrees Increments
Inlet Pressure
150 psi
GPM @ 100 PSI
4.8
GPM @ 60 PSI
6.1
Housing Material
Cast iron
Motor Ambient Temp. Rating
40 Degrees C
Inlet
1-1/4 in FNPT
Impeller Material
Bronze
GPM @ 90 PSI
5.2
Max. Case Pressure
200 psi
Installation Position
Horizontal
GPM @ 30 PSI
7.1
Motor Enclosure
Open Drip Proof
GPM @ 20 PSI
7.3
Best Efficiency GPM @ PSI
6.0 @ 75
Horsepower
3/4 hp
Duty Cycle
Continuous
Best Efficiency Head
75 ft
Flow Rate @ 80 psi
5.5 gpm
NPSHr
150 psi
Flow Rate @ 50 psi
6.4 gpm
Seal Type
Mechanical
Pump Housing Material
Cast Iron
Standards
UL Recognized Motor
Motor Frame Designation
56J
Shut Off Pressure (Maximum)
120 psi
Nameplate Voltage
115/230V AC
Features
Seals and an Easily Accessible Drain Plug, Spray Equipment
Flow Rate @ 10 psi
7.6 gpm
Flow Rate @ 20 psi
7.3 gpm
Maximum Flow Rate
7.6 gpm
Flow Rate @ 60 psi
6.1 gpm
Frequency
60 Hz
Maximum RPM
3,450 RPM
Discharge Type
NPT
Flow Rate @ 15 psi
7.4 gpm
Wetted Material
316 Stainless Steel, Bronze, Buna-N, Carbon, Cast Iron, Ceramic
Motor Ambient Temperature (Maximum)
104 Degrees F
Maximum Media Temperature
230 Degrees F
Compatible with Media Type
Non-Flammable Liquids, Water
Flow Rate @ 30 psi
7.1 gpm
Flow Rate @ 70 psi
5.8 gpm
Case Pressure (Maximum)
200 psi
Specific Gravity (Maximum)
1
Minimum Flow Rate
5.2 gpm
Thermal Overload Protection
Yes
Impeller Design
Peripheral Vaned
Flow Rate @ 90 psi
5.2 gpm
Flow Rate @ 40 psi
6.8 gpm
Mounting Orientation
Horizontal
Intake Type
NPT
Flow Rate @ 100 psi
4.8 gpm
Shaft Seal Material
304 Stainless Steel/Buna-N/Carbon/Ceramic
Pumping Application
Boiler Feed, Condensate Return, Liquid Transfer, Booster Service, Reverse Osmosis and Water Treatment
Flow Rate (Maximum)
7.6 gpm
Feet of Head (Maximum)
100 ft
Flow Rate (Minimum)
5.2 gpm
Case Pressure - Maximum
200 psi
Motor Design
Capacitor-Start/Run
Media Temperature - Maximum
230 Degrees F
Media Temperature - Minimum
-20 Degrees F
Electrical Connection Type
Hardwired
Priming
Self-Priming
Chemical Compatibility
Non-Flammable Liquids, Water
Shut Off Pressure - Maximum
120 psi
Ambient Temperature - Maximum
104 Degrees F
Number of Stages
1
Operation
Manual
Best Efficiency Flow
5.5 gpm
Full Load Current
11.3/5.6
Shaft Seal Type
Mechanical
Pump Design
Regenerative Turbine
Power Source
Electric Motor
Power Source - TS Only
Electric Motor

Description

Turbine Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 3/4 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 120 psi, Maximum Flow Rate 7.6 gpm, Flow Rate @ 10 psi 7.6 gpm, Flow Rate @ 20 psi 7.3 gpm, Flow Rate @ 30 psi 7.1 gpm, Compatible Intake Pipe Size 1 1/4 in, Compatible Discharge Pipe Size 1 in, Discharge Type NPT, Motor Type Capacitor-Start/Run, Best Efficiency Head 75 ft, Case Pressure (Maximum) 200 psi

Restrictions

WARNING: Cancer and Reproductive Harm For more information go to www.P65Warnings.ca.gov

Ratings & reviews

3 reasons you can count on us

  • Supplies for every job.

    10 million items and the exact one you need.

  • When you need it fast, count on Zoro!

    2 million products ship in 1 day.

  • Stretch your budget further.

    Everyday low prices on the brands you love.

Explore more products