- MFR #
- 4UP58
- Zoro #
- G0878394
- UPC #
- 190735335451
- Country of Origin
- United States
- HP
- 2 hp
- Voltage
- 208-230/460
- Wetted Materials
- Bronze Fitted, Cast Iron
- Seal Material
- Buna-N/Carbon/Ceramic (Face)
- Max. Pressure
- 300 psi
- Bearing Type
- Sealed Ball Bearing (Motor Bearing)
- GPM @ 75 PSI
- 19.0
- Max. Case Pressure
- 300 psi
- GPM @ 50 PSI
- 21.0
- Inlet (In.)
- 1
- GPM @ 20 PSI
- 23.7
- Impeller Material
- Bronze
- Includes
- Cast Casing
- Inlet
- 1 in
- Phase
- Three
- GPM @ 60 PSI
- 18.2
- Duty
- Continuous
- Frame
- 56c
- Outlet
- 1 in
- Motor Enclosure
- Totally Enclosed Fan Cooled
- GPM @ 10 PSI
- 25.0
- Max. Specific Gravity
- 1
- Item
- Turbine Pump
- Best Efficiency GPM @ Head
- 9.4 gpm @ 75 psi ft
- Motor Type
- 3-Phase
- Port Rotation
- 90 Degrees Increments
- Impeller Type
- Regenerative Turbine
- Amps
- 5.6-5.2/2.6
- Agency Compliance
- CE & CSA ON MOTOR ONLY, UL
- Housing Material
- Cast iron
- Inlet Pressure
- 200 psi
- GPM @ 30 PSI
- 22.8
- Standards
- CE Certified (Motor Only), CSA Certified (Motor Only), UL Listed
- Discharge Type
- NPT
- Wetted Material
- Bronze Fitted, Cast Iron
- Compatible with Media Type
- Water
- Flow Rate @ 70 psi
- 18.8 gpm
- Flow Rate @ 100 psi
- 15.7 gpm
- Best Efficiency Head
- 75 ft
- Specific Gravity (Maximum)
- 1
- Shut Off Pressure (Maximum)
- 85 psi
- Impeller Design
- Peripheral Vaned
- Seal Type
- Type 21
- Flow Rate @ 50 psi
- 21.7 gpm
- Flow Rate @ 120 psi
- 13.5 gpm
- Nameplate Voltage
- 208-230/460V AC
- Flow Rate @ 60 psi
- 20 gpm
- Minimum Flow Rate
- 19 gpm
- Flow Rate @ 20 psi
- 23.7 gpm
- Pump Housing Material
- Cast Iron
- Flow Rate @ 200 psi
- 2.7 gpm
- Intake Type
- NPT
- Motor Frame Designation
- 56C
- Maximum Flow Rate
- 25 gpm
- Flow Rate @ 40 psi
- 39 gpm
- Flow Rate @ 30 psi
- 22.8 gpm
- Duty Cycle
- Continuous
- Flow Rate @ 80 psi
- 17.7 gpm
- Flow Rate @ 10 psi
- 25 gpm
- NPSHr
- 462 ft
- Case Pressure (Maximum)
- 300 psi
- Discharge Rotation
- 90 Degrees Increments
- Horsepower
- 2 hp
- Best Efficiency Flow
- 19 gpm
- Full Load Current
- 5.6-5.2/2.6
- Shut Off Pressure - Maximum
- 91 psi
- Shaft Seal Type
- Mechanical
- Flow Rate (Minimum)
- 19 gpm
- Motor Design
- Three-Phase
- Flow Rate (Maximum)
- 25 gpm
- Operation
- Manual
- Ambient Temperature - Minimum
- -20 Degrees F
- Pump Design
- Regenerative Turbine
- Feet of Head (Maximum)
- 500 ft
- Ambient Temperature - Maximum
- 86 Degrees F
- Number of Stages
- 1
- Pumping Application
- Boiler Feed, Booster Service, Condensate Return, Cooling and Heat Transfer, Liquid Transfer
- Power Source
- Electric Motor
- Shaft Seal Material
- Buna-N/Carbon/Ceramic
- Media Temperature - Maximum
- 230 Degrees F
- Priming
- Manual
- Chemical Compatibility
- Water
- Media Temperature - Minimum
- -20 Degrees F
- Case Pressure - Maximum
- 300 psi
- Power Source - TS Only
- Electric Motor
- Power Source - old
- Electric Motor
Create Account