- MFR #
- 4JPE2
- Zoro #
- G2480396
- UPC #
- 190735326978
- Country of Origin
- India
- HP
- 1 hp
- Voltage
- 115/230
- Wetted Materials
- Bronze, Buna-N, Carbon, Ceramic and 316 Stainless Steel
- Seal Material
- 316 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
- Max. Pressure
- 120 psi
- Impeller Material
- Bronze
- Motor Enclosure
- Open Drip Proof
- Inlet
- 1-1/4 in FNPT
- GPM @ 30 PSI
- 10.6
- Outlet
- 1 in
- Max. Case Pressure
- 200 psi
- GPM @ 60 PSI
- 8.9
- Inlet (In.)
- 1
- GPM @ 40 PSI
- 10
- GPM @ 75 PSI
- 8.3
- GPM @ 80 PSI
- 8
- Hz
- 60
- GPM @ 90 PSI
- 7.5
- Inlet Pressure
- 132 psi
- Duty
- Continuous
- Bearing Type
- Ball
- Max. Specific Gravity
- 1
- GPM @ 20 PSI
- 11.1
- GPM @ 50 PSI
- 8.6
- Item
- Turbine Pump
- Housing Material
- Bronze
- Motor Type
- Capacitor-Start/Run
- GPM @ 100 PSI
- 3
- Impeller Type
- Open
- GPM @ 10 PSI
- 11.2
- Agency Compliance
- Motor is UL Recognized
- Frame
- 56J
- Phase
- Single
- Motor RPM
- 3,450 RPM
- Best Efficiency GPM @ Head
- 9.4 @ 50 ft
- Amps
- 14.4/7.2
- Features
- Designed to Handle Liquids with Entrained Air
- Standards
- UL Recognized Motor
- Best Efficiency Head
- 50 ft
- Flow Rate @ 90 psi
- 3.7 gpm
- Flow Rate @ 10 psi
- 11.2 gpm
- Nameplate Voltage
- 115/230V AC
- Wetted Material
- 316 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic
- Flow Rate @ 80 psi
- 4.3 gpm
- Minimum Flow Rate
- 3 gpm
- Minimum Media Temperature
- -20 Degrees F
- Frequency
- 60 Hz
- Pump Housing Material
- Bronze
- Impeller Design
- Peripheral Vaned
- Case Pressure (Maximum)
- 200 psi
- Flow Rate @ 70 psi
- 5.8 gpm
- Flow Rate @ 20 psi
- 11.1 gpm
- Discharge Type
- NPT
- Flow Rate @ 60 psi
- 8.9 gpm
- Specific Gravity (Maximum)
- 1
- Flow Rate @ 100 psi
- 3 gpm
- Intake Type
- NPT
- Shut Off Pressure (Maximum)
- 120 psi
- Seal Type
- Mechanical Seal
- Duty Cycle
- Continuous
- NPSHr
- 304.92 ft
- Maximum Flow Rate
- 11.2 gpm
- Horsepower
- 1 hp
- Operation
- Manual
- Priming
- Self-Priming
- Motor Frame Designation
- 56J
- Flow Rate @ 40 psi
- 10 gpm
- Flow Rate @ 50 psi
- 8.6 gpm
- Maximum RPM
- 3,450 RPM
- Flow Rate @ 30 psi
- 10.6 gpm
- Flow Rate @ 15 psi
- 11 gpm
- Media Temperature - Maximum
- 230 Degrees F
- Pumping Application
- Liquid Transfer
- Motor Design
- Capacitor-Start/Run
- Best Efficiency Flow
- 4.3 gpm
- Pump Design
- Regenerative Turbine
- Feet of Head (Maximum)
- 100 ft
- Power Source
- Electric Motor
- Shut Off Pressure - Maximum
- 120 psi
- Shaft Seal Type
- Mechanical
- Case Pressure - Maximum
- 200 psi
- Flow Rate (Minimum)
- 3 gpm
- Shaft Seal Material
- 316 Stainless Steel/Buna-N/Carbon/Ceramic
- Media Temperature - Minimum
- -20 Degrees F
- Chemical Compatibility
- Non-Flammable Liquids, Water
- Mounting Orientation
- Horizontal
- Ambient Temperature - Maximum
- 104 Degrees F
- Number of Stages
- 1
- Thermal Overload Protection
- Yes
- Full Load Current
- 14.4/7.2
- Flow Rate (Maximum)
- 11.2 gpm
- Electrical Connection Type
- Hardwired
- Power Source - TS Only
- Electric Motor
- Power Source - old
- Electric Motor
Create Account