Counter Top Display Grease, PK6

The reason why the grease does not go into the fitting is not because of the fitting; it’s because the grease has dried up inside ofthe joint or pin groove. Simply put, you cannot push new, soft grease intoa joint if the old grease has become hard and dried,blocking the new grease.The Grease Joint Rejuvenator®cleans the joint by forcing any light oil in through the joint. Just fill the Grease Joint Rejuvenator®with light oil, connect to the fitting andgently tap over and over again until the new oil has completely traveled through the old,hardened grease. Like magic, all of a sudden you feel the joint open and the joint or pin can now be greased

• Opens clogged grease joints
• Lubricates and unclogs bearings, pinned joints, kingpins, shafts, bushings, etc.
• Can be used on all farm, construction, lawn, excavating and manufacturing equipment as well as trucks, trailers, marinedrive trains, milling machines, lathes and any place Zerk fittings are used
• Two hardened, four-jaw-locking grease couplers
• Patented