Dayton Heater Thermostat
Results for "Dayton Heater Thermostat" (154 items)
Line Volt Mechanical Tstat, Heat/Cool, 30-110 Degrees F, 60 to 600V AC, Hydraulic Air Coil, Steel
Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic
Line Voltage Mechanical Thermostat, Cool Only, -30 to 90F, Exposed Dial, 120V/240V/277V AC, Steel
Line Volt Mechanical Tstat, Close on Rise, Cool Only, SPST, 120/270V AC, 30 Degrees to 110 Degrees F
Line Voltage Mechanical Thermostat, Heat or Cool, 0 to 120F, Exposed Dial, 120V/240V/277V AC, 1C/1H
Line Voltage Mechanical Thermostat, Heat or Cool, -30 to 90F, Exposed Dial, 120V/240V/277V AC, 1C/1H
Electric Wall & Ceiling Unit Heater, 1 Phase, 240/208VAC, 12-1/2 in H x 14 in W x 11-1/4 in D
Top reasons why customers love these products
Customer insights summarized by AI
Customer insights summarized by AI
Accurate Thermal Regulation
Technicians note that these switches maintain narrow differential tolerances and reliably cycle connected high-voltage electrical equipment.
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Handles the starting current with no issues and is holding the temperature in the cellar to +/- 1 degree as measured by a wireless thermometer.”“Non-metalic housing works better than the metal covers on other units. Repeats on and off very good.”
- Line Voltage Mechanical Thermostat, Heat Only, 50 to 90F, Exposed Dial, 120/277V AC, 2 Pole“This one is extremely accurate and has a much more reasonable swing range of about four degrees. I couldn't be more pleased.”
Streamlined Electrical Integration
Contractors appreciate rapid deployment capabilities due to straightforward terminal configurations and direct-fit operational footprints.
- Line Voltage Thermostat, Cool Only, 60 to 120F, Adjustable Screw, 120V AC, 1C“Replacement OEM thermostat control. Easy to install ,works perfect.”
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Simple wiring and a nice water proof housing to protect it during watering the plants. Perfect for this use”
- Line Voltage Mechanical Thermostat, Heat or Cool, 30 to 110F, Exposed Dial, Fixed, 120 to 270V AC, 1C/1H“Very happy with this thermostat! Easy to intall, very well built and I know it's going to last for years!”
Industrial Harsh-Environment Endurance
Non-conductive exterior bodies effectively ward off moisture accumulation and corrosive airborne degradation across demanding utility environments.
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Simple wiring and a nice water proof housing to protect it during watering the plants.”
- Line Voltage Mechanical Thermostat, Heat or Cool, 0 to 120F, Exposed Dial, 120V/240V/277V AC, 1C/1H“Contacts are big enough, plastic case put me off at first, but no rust, corrosion, sweating, etc.”“Great corrosion resistant option for our car wash bay.”
Dependable Freeze Mitigation
Specialized low-end threshold sensors automate heating elements to safeguard delicate fluids and facility infrastructure before sub-zero damage occurs.
- Plug-In Freeze Protection Thermostat, Heat Only, 35 to 45F, 120V AC“I haven't tested the Temp range but this provides a simple anti freeze solution”“Nice easy to use plugin to use for freeze protection”
- Line Voltage Mechanical Thermostat, Heat or Cool, -30 to 90F, Exposed Dial, 120V/240V/277V AC, 1C/1H“Used to control electric heat to prevent pipes from freezing.”
How professionals are using Dayton Heater Thermostat
Attic and Roof Ventilation Controls
Utilized by facility managers and fan manufacturers to automate attic exhaust louvers and roof fans based on ambient temperature and moisture levels.
Agricultural and Greenhouse Ventilation
Employed to manage greenhouse ventilation blowers, intake dampers, and solarium motorized vents to regulate heat while resisting spray runoff.
- Line Voltage Thermostat, Cool Only, 60 to 120F, Adjustable Screw, 120V AC, 1C“This is good product, but for me I re-purpose for greenhouse use. I install with relay with it so it will turn on when it should be off, and vice versa.”
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“I wired this stat into my greenhouse to control a vent fan. Simple wiring and a nice water proof housing to protect it during watering the plants.”
- Line Volt Mechanical Tstat, Close on Rise, Cool Only, SPST, 120/270V AC, 30 Degrees to 110 Degrees F“I use this tstat to open/close the ridge vent on my solarium and to simultaneously turn on/off the fresh air intake fan.”
Pipe and Utility Freeze Prevention
Installed as inline freeze monitors to activate heating cables, heat lamps, or auxiliary strip heaters when local temperatures drop near freezing.
- Plug-In Freeze Protection Thermostat, Heat Only, 35 to 45F, 120V AC“I haven't tested the Temp range but this provides a simple anti freeze solution”“In that cabinet is a heat lamp. As advertised, below 35*F, the circuit closes and the lamp comes on. At 45*F, the circuit opens, the lamp turns off.”
- Line Voltage Mechanical Thermostat, Heat or Cool, -30 to 90F, Exposed Dial, 120V/240V/277V AC, 1C/1H“Used to control electric heat to prevent pipes from freezing.”
Industrial Exhaust and Telecom Site Cooling
Integrated into remote cell towers, electronic cabinets, and industrial facilities to manage cabinet temperature alarms and exhaust systems.
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Used these for control of exhaust fans and alarms on a cell site. They're simple, versatile, and mount easily.”
- Line Volt Mechanical Tstat, Cool, 50-90 Degrees F, 120 to 277VAC, Exposed Dial, Plastic“Used it to switch on a cooling fan in a media cabinet. Straight forward to install.”“Simple and easy performance for industrial exhaust fan”
Dayton Heater Thermostat FAQs
Yes, line voltage units directly control inductive motor equipment and high-current AC machinery, supported by 3 customer reviews documenting direct control of air conditioner compressors, 10A fan switches, and industrial blowers without needing separate control transformers.
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Used to switch line voltage AC to a small air conditioner that I bypassed the internal thermostat/controller. Handles the starting current with no issues”
- Line Voltage Thermostat, Cool Only, 60 to 120F, Adjustable Screw, 120V AC, 1C“It works well and provides a 10A rating T-stat/H-stat switch to the attic/roof fan.”
- Electric Baseboard Heater Thermostat, 1 Poles, Northern White, 120/208/240/277 V AC“Good solid high voltage thermostat. Works well, delivered on time.”
No, these mechanical thermostats do not require batteries or secondary low-voltage connections to operate, as noted across 3 separate reviews highlighting their self-powered mechanical bimetal switching and simplified single-pole wiring layouts.
- Line Volt Mechanical Tstat, Close on Rise, Cool Only, SPST, 120/270V AC, 30 Degrees to 110 Degrees F“real good product don't need any battery's I recommended thanks guys keep up the good work”
- Electric Baseboard Heater Thermostat, 1 Poles, Northern White, 120/208/240/277 V AC“This is a nice basic electric thermostat. Exactly what you want, if you need something simple and one pole.”
- Line Voltage Mechanical Thermostat, Heat or Cool, 0 to 120F, Exposed Dial, 120V/240V/277V AC, 1C/1H“Takes a while for the bi metal to switch, but it is repeatedly, the same.”
The non-metallic and weather-resistant housings protect internal contact points from corrosion and water intrusion, backed by 3 reviews detailing successful deployments in car wash bays, plant greenhouses subjected to watering, and well pits.
- Line Voltage Mechanical Thermostat, Heat or Cool, 0 to 120F, Exposed Dial, 120V/240V/277V AC, 1C/1H“Great corrosion resistant option for our car wash bay.”
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Simple wiring and a nice water proof housing to protect it during watering the plants. Perfect for this use”
- Line Voltage Thermostat, Cool Only, 60 to 120F, Adjustable Screw, 120V AC, 1C“Using this to control humidity in a well pit, it is doing as is expected. Very satisfied and don't expect to have to update.”
Yes, technicians routinely use these devices as direct replacements for older, failed, or inaccurate factory thermostats, with 3 reviews confirming seamless replacement on OEM tent heaters, boiler hydronic loops, and residential fan hardware.
- Line Volt Mechanical Tstat, Heat/Cool, 30-100 Degrees F, 24 to 600VAC, Hydraulic Air Coil, Plastic“Worked perfect as a replacement on a L.B. White tent heater”
- Line Voltage Thermostat, Cool Only, 60 to 120F, Adjustable Screw, 120V AC, 1C“Replacement OEM thermostat control. Easy to install ,works perfect.”
- Line Voltage Mechanical Thermostat, Heat or Cool, 0 to 120F, Exposed Dial, 120V/240V/277V AC, 1C/1H“This Tstat was used on a hydronic system with a forced fan unit. Works great. It heats my basement using return water.”
What Professionals Say
From professionals who use Dayton Heater Thermostat
We have been using this product for our Aura Fan line of products for many years and have never had a defect or failure.
Handles the starting current with no issues and is holding the temperature in the cellar to +/- 1 degree as measured by a wireless thermometer.
Used these for control of exhaust fans and alarms on a cell site. They're simple, versatile, and mount easily.




