12 Volt Gear Motor

DC Gearmotor, Gearmotor Voltage 12V DC, Max. Torque 280.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 23 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 150 lb, Input HP 1/6, Gear Ratio 82:1, Full Load Amps 9.75 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY5

Tarp Gear Motor, 900 Watt, Color Silver, For Use With 19A790, 19A791, Includes Chrome/Plastic Cover And Fasteners

The AC Gearmotor is a powerful, high quality gear motor that is ideal for a variety of applications. This gearmotor is designed to deliver high torque at low speeds and is ideal for use in conveyor, machine tool, and many other applications. It features a totally enclosed fan-cooled (TEFC) enclosure that protects the gears from dust, dirt, and other contaminants. It has a single-reduction, parallel shaft, and a die cast aluminum gear case for long lasting durability. It has a steel shaft and is made of cast iron. It also features a high-speed, direct-drive, shaded pole motor.

Belt Drive Motor, Single Phase, Motor Design Capacitor-Start, 1 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115/208-230V AC, 13.6/6.9-6.9 Full Load Amps, 56 Frame, 60 Hz, Motor Service Factor 1.15, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Rolled Steel, Shaft Dia. 5/8 in

AC Gearmotor, Gearmotor Voltage 115V AC, 1 Gearmotor Phase, Max. Torque 600.0 in-lb, Single Gearmotor Shaft Type, Gearmotor Shaft Orientation Parallel, Gearmotor Rotation CW/CCW, Nameplate RPM 6 RPM, Open Dripproof Gearmotor Enclosure, All Angle Gearmotor Mounting Position, 60 Hz Hz, Overhung Load 300 lb, Input HP 1/4 hp, Gear Ratio 286:1, Full Load Amps 3.1, Insulation Class B, None Thermal Protection, Motor Type Split-Phase, Unpainted Finish, Die Cast Zinc Housing

The Dayton 6K778 Split-Phase Belt Drive Motor is the perfect solution for belt drive fans and blowers. This split-phase motor has a 1/2 in. shaft diameter, which makes it compatible with most fan/blower applications. The open dripproof motor enclosure design protects against water, oil, dirt and other contaminants. With a 115V AC voltage, this belt drive motor is ideal for use in factories or warehouses where heavy duty equipment is used. It features one speed with a 1, 701 to 1, 800 RPM range. If you are looking for an efficient belt drive fan or blower motor that will not let you down during your next project, then look no further than the Dayton 6K778 Split Phase Belt Drive Motor.

Belt Drive Motor, Single Phase, Motor Design Capacitor-Start, 1 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115/208-230V AC, 13.6/6.9-6.9 Full Load Amps, 56H Frame, 60 Hz, Motor Service Factor 1.15, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Rolled Steel, Shaft Dia. 5/8 in

Belt Drive Motor, Single Phase, Motor Design Split-Phase, 1/4 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115V AC, 5.3 Full Load Amps, 48 Frame, 60 Hz, Motor Service Factor 1.35, Motor Thermal Protection Auto, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Open Dripproof, Motor Mounting Type Cradle Base, Motor Mounting Position All Angle, Motor Frame Material Rolled Steel, Shaft Dia. 1/2 in, Shaft Length 1 1/2 in

Electric Tarp Gear Motor, 600W/90:1

DC Gearmotor, Gearmotor Voltage 12V DC, Max. Torque 40.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 24 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 50 lb, Input HP 1/30, Gear Ratio 100:1, Full Load Amps 2.1 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish, Replacement Brushes 6YHY4

DC Gearmotor, Gearmotor Voltage 90V DC, Max. Torque 40.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 29 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 50 lb, Input HP 1/30, Gear Ratio 100:1, Full Load Amps 0.35 A, Insulation Class F, None Thermal Protection, Motor Type Permanent Magnet DC, Unpainted Finish, Replacement Brushes 6YHY3