150 Watt Round Explosion Proof LED Light, 21000 Lumens, Class 1 Div 2, 5000K, 100-277V

Product Overview

This round explosion-proof LED high bay uses 150W to produce 21,000 lumens at 5000K. It operates on 100-277V and has a gray powder-coated aluminum housing.

A tempered-glass lens provides a 120-degree beam angle. Mounting is by yoke or 3/4 in NPT pendant; dimensions are 14.96 inches wide by 14.37 inches high.

Where This Product Fits Best

This fixture is specified for hazardous-location lighting and oil and gas facility lighting. Its classification must match the installed location.

The round high-bay form factor suits elevated fixture locations where a broad 120-degree distribution is required. Confirm mounting support and wiring methods before installation.

Performance and Functional Considerations

The fixture delivers 140 lumens per watt with 70+ CRI. A 1-10V dimming interface is included.

Electrical characteristics include 50-60 Hz operation, greater than 0.90 power factor, and less than 10 percent THD. It has IP66 and IK08 ratings, 10kV surge protection, a -40F to 149F operating range, and 150,000-hour L70 life.

Safety, Certifications, and Warranty

UL 844 covers Class I Division 2 Groups A-D, Class II Divisions 1 and 2 Groups E-G, and Class III.

UL 1598 wet-location and UL 1598A Marine Outside Type listings are stated. CSA, ATEX, and IECEx certifications are stated. The warranty is five years.

• Certified for Class 1 Division 2, Class 2 Division 1 and 2, and Class 3 environments; UL 844, UL 1598, UL 1598A, CSA, ATEX, and IECEX listed for hazardous and wet locations.
• Powder coated aluminum housing with tempered glass lens achieves IP66 and IK08 ratings, supporting use in wet, dusty, and high-impact industrial settings.
• Delivers 150,000 hour L70 lifespan with 1-10V dimming for energy management and reduced maintenance in high bay hazardous area applications.