240 Watt Round Explosion Proof LED Light, 33600 Lumens, Class 1 Div 2, 5000K, 100-277V

Product Overview

This gray round explosion-proof LED light operates on 100-277V and uses 240W. It delivers 33,600 lumens at 5000K with a 70+ CRI.

The fixture has a powder-coated aluminum housing, tempered glass lens, and 120 degree beam angle. Mounting is specified as yoke or 3/4 in NPT pendant.

Where This Product Fits Best

This fixture is identified for hazardous-location lighting and paint booth lighting. Its listed classifications should be matched to the area's required group, division, or zone designation.

The 14.96-inch-wide fixture weighs 20 pounds. Confirm mounting structure capacity and installation clearances before installation.

Performance and Functional Considerations

Output is rated at 140 lumens per watt, with a stated 150,000-hour L70 life. The fixture operates at 50/60 Hz with power factor above 0.90.

Standard 1-10V dimming is provided. Electrical performance includes less than 10% THD and 10kV surge protection.

The IP66 and IK08 construction is rated for operation from -40 degrees F to 149 degrees F.

Safety, Certifications, and Warranty

Listings include UL844, UL 1598, UL 1598A, CSA, ATEX, and IECEx. The fixture is rated for wet locations.

Classifications include Class I Division 2, Class II Divisions 1 and 2, Class III, and listed Zone ratings. Verify project requirements before installation.

• 240W fixture delivers 33,600 lumens at 140 lm/W with a 5000K color temperature.
• Rated for Class 1 Division 2 Groups A-D, Class 2 Division 1 Groups E-G, Class 3, and Zone 2 locations.
• Powder-coated aluminum housing is IP66 and IK08 rated, with a -40F to 149F operating temperature range.