- MFR #
- 1794224K
- Zoro #
- G3462831
- UPC #
- 731325245813
- Country of Origin
- Taiwan, Province of China
- Item
- Wood Lathe
- Motor HP
- 3 hp
- Phase
- Three
- Voltage
- 220V AC
- Frequency
- 60 Hz
- Swing Over Bed (In.)
- 24
- Distance Between Centers
- 42 in
- Horsepower
- 3 hp
- Number of Spindle Speeds
- Variable
- Tailstock Taper
- MT3
- Cross Travel (In.)
- 4-1/2
- Tailstock Travel (In.)
- 4-1/2"
- Hz
- 60
- Number of Threads (mm)
- 0
- Number of Threads (In.)
- 0
- Includes
- (2) Lamps, (4) Leveling Foot, 19 mm Combination Wrench, Air Blow Gun with Hose, Comparator Dead Center, Comparator Spur Center, Face Plate Wrench, Knock-Out Rod, Live Center with Pin, Spindle Lock, Spur Center, Vacuum Adaptor, Vacuum Adaptor Support Bracket, Vacuum Chuck
- Thread Range (In.)
- 1-1/4 to 8
- Spindle Speed (RPM)
- 40 to 3500
- Features
Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments. Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features. Vacuum system provides quick method of chucking bowl blanks. 15-amp quad receptacle for easy reach of powered accessories. Two 100W task lamps provide ideal lighting. Air nozzle with quick connect for clearing dust/chips. Set of dead centers which hold a spindle for visual comparison. Laser etched quill is self ejecting. Two position mount for the optional bed extension. Brass tipped knockout bar concentrates the action in the sliding handle, the brass tip will not damage drive centers. Attached tool caddy allows convenient access to centers, wrenches, etc. Tailstock has internal storage for additional accessories. Chrome trimmed handwheels are ergonomic for a comfortable feel. Magnetic-backed remote on/off switch can be moved anywhere on the machine. A variable frequency drive allows this machine to run on single or three phase power.
- Distance Between Centers (In.)
- 42
- Spindle Bore (In.)
- 5/8
- Swing Over Cross Slide (In.)
- 21
- Spindle Taper
- MT-2
- Series
- 4224B
- Swing Over Bed
- 24 in
- Min. Spindle Speed
- 40 RPM
- Current
- 10 A
- Spindle Bore
- 5/8 in
- Max. Spindle Speed
- 3,500 RPM
- Number of Inch Threads
- 0
- Number of Metric Threads
- 0
- Swing Over Cross Slide
- 21 in
- Sound Level
- 78 dB
- Min. Threads per Inch
- 3 1/2
- Application
- Wood Turning
- Max. Threads per Inch
- 80
- Spindle Nose Taper
- MT2
- Includes Stand
- Stand Included
- Manufacturer Warranty
- Limited
- Threads per Inch - Maximum
- 8
- Lathe Head Drive
- Electronic Variable Speed
- Spindle Speed - Maximum
- 3,500 RPM
- Spindle Speed - Minimum
- 40 RPM
- Swing Over Gap
- 24 in
- Threads per Inch - Minimum
- 8
Additional $250.00 delivery surcharge applies per item.
See details
Create Account