- Item
- IEC Magnetic Contactor
- Auxiliary Contact Form
- 1NC/1NO
- Coil Voltage
- 120V AC
- Number of Poles
- 3
- Full Load Amps-Inductive
- 12 A
- Full Load Amps-Resistive
- 25 A
- Reversing Capability
- Reversing
- Terminal Connection Type
- Screw Clamp
- Number of Auxillary Contacts
- 2
- Standards
- BV, CCC, CSA, CSA C22.2 No 14, DNV, EN 60947-4-1, EN 60947-5-1, GL, GOST, IEC 60335-1, IEC 60947-4-1, IEC 60947-5-1, LROS, RINA, UKCA, UL 508, UL Listed
- Includes
- Electrical Interlock, Mechanical Interlock
- Enclosure NEMA Rating
- No Enclosure
- HP @ 3 Phase - 575V
- 10 hp
- Frame / Series / Class / Code
- TeSys
- HP @ 1 Phase - 230V
- 2
- Reversing
- Yes
- Series
- TeSys Deca
- Rated Insulation Volts
- 600/690V
- Rated Short-Time Withstand Current
- 30 A (at 40°C for 10 min Power Circuit), 61 A (at 40°C for 1 min Power Circuit), 105 A (at 40°C for 10 s Power Circuit), 210 A (at 40°C for 1 s Power Circuit), 100 A (For 1 s Signalling Circuit), 120 A (For 500 ms Signalling Circuit), 140 A (For 100 ms Signalling Circuit)
- Fuse Amps
- 10 A (Signalling Circuit), 40 A (Type 1 Power Circuit), 25 A (Type 2 Power Circuit)
- Fire Rating
- UL 94 V1
- Control Circuit Voltage Limits
- Drop-Out AC: 0.3 to 0.6 Uc (at -40 to 70°C 50/60 Hz); Operational AC: 0.8 to 1.1 Uc (at -40 to 60°C 50 Hz), 0.85 to 1.1 Uc (at -40 to 60°C 60 Hz), 1 to 1.1 Uc (at 60 to 70°C 50/60 Hz)
- Mechanical Durability
- 15 Mcycles
- IP Rating
- IP20
- Non-Overlap Time
- 1.5 ms
- Rated Making Capacity
- 250 A @ 440V (Power Circuit), 140 A (AC Signalling Circuit), 250 A (DC Signalling Circuit)
- Application
- Motor Control, Resistive Load
- Hold VA
- 7.5 VA (at 60 Hz 20°C), 7 VA (at 50 Hz 20°C)
- Shock Resistance
- 15 G for 11 ms (Contactor Closed), 10 G for 11 ms (Contactor Open)
- Switching Voltage
- 17 V (Signalling Circuit)
- Rated Breaking Capacity
- 250 A @ 440V
- Overvoltage Category
- CAT III
- Operating Time
- 12 to 22 ms (Closing), 4 to 19 ms (Opening)
- Signalling Circuit Frequency
- 25 to 400 Hz
- Operating Speed
- 3600 cycles per hr
- Impulse Withstand Voltage
- 6 kV
- Tightening Torque
- 1.7 Nm (Control Circuit), 1.7 to 2.5 Nm (Power Circuit)
- Max. Operating Watts
- 3 kW (at 220 to 230V AC 50 Hz), 5.5 kW (at 380 to 400V AC 50 Hz), 5.5 kW (at 415 to 440V AC 50 Hz), 7.5 kW (at 500V AC 50 Hz), 7.5 kW (at 660 to 690V AC 50 Hz)
- Switching Current
- 5 mA (Signalling Circuit)
- Impedance
- 2.5 mOhm
- Features
- Without Built-In Suppressor Module; Preassembled with Reversing Power Busbar
- Insulation Resistance Range
- Greater Than 10 MOhms (Signalling Circuit)
- Vibration Resistance
- 4 G (Contactor Closed), 2 G (Contactor Open)
- Includes Protective Cover
- Yes
- Inrush VA
- 70 VA
- Net Weight
- 0.697 kg
- Electrical Durability
- 2 Mcycles (12 A, AC-3, Less than 440 V); 0.8 Mcycles (25 A, AC-1, Less than 440 V)
- Environmental Attributes
- Mercury Free, PVC Free, Toxic Heavy Metal Free, Pollution Degree 3
- Watts Loss
- 2 to 3W
- Horsepower @ Single Phase - 120V AC
- 1 hp
- Contactor Style
- IEC
- Horsepower @ Three Phase - 600V AC
- 10 hp
- Maximum Voltage Rating
- 690V AC
- Horsepower @ Single Phase - 240V AC
- 2 hp
- Resistance Properties
- Fire Resistant, Insulation Resistant
- Maximum Operating Temperature
- 140 Degrees F
- Electrical Operating Durability
- 2,000,000, 800,000
- NEMA Enclosure Rating
- No Enclosure
- Embedded Surge Suppressor
- No
- Phase
- Three
- Full Load Current - Resistive
- 25 A
- Number of Normally Open Main Contacts
- 3
- Horsepower @ Three Phase - 240V AC
- 3 hp
- Mounting Style
- DIN Rail, Plate
- Horsepower @ Three Phase - 480V AC
- 7 1/2 hp
- Minimum Operating Temperature
- -40 Degrees F
- Full Load Current - Inductive
- 12 A
- Mechanical Operating Durability
- 15,000,000
- Frequency
- 50/60 Hz
- Horsepower @ Three Phase - 208V AC
- 3 hp
- Includes Auxiliary Contacts
- Yes
- Climatic Withstand
- IACS E10; IEC 60947-1 Annex Q category D
- Rated Operational Voltage
- Power circuit Less than or Equal to 690 V AC 25 to 400 Hz; Power circuit Less than or Equal to 300 V DC
- Auxiliary Contacts Type
- Mechanically linked 1 NO + 1 NC IEC 60947-5-1; Mirror contact 1 NC IEC 60947-4-1
- Pollution Degree
- 3
- Fire Resistance
- 1562°F (850°C) IEC 60695-2-1
- Power Dissipation Per Pole
- 1.56 W AC-1; 0.36 W AC-3
- Ambient Air Temperature For Operation
- -40 to 140°F (-40 to 60°C); 140 to 158°F (60 to 70°C) with derating
- Maximum Operating Rate
- 3600 cyc/h 140°F (60°C)
- Conventional Free Air Thermal Current
- 10 A (at 140°F (60°C)) for signalling circuit; 25 A (at 140°F (60°C)) for power circuit
- Device Presentation
- Preassembled with reversing power busbar
- Operating Altitude
- 0 to 9842.52 ft (0 to 3000 m)
- Product Name
- TeSys D; TeSys Deca
- Contactor Application
- Resistive load; Motor control
- Control Circuit Type
- AC 50/60 Hz
- Rated Operational Current
- 25 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-1 for power circuit; 12 A (at Less than 140°F (60°C)) at Less than or Equal to 440 V AC AC-3 for power circuit
- Protective Treatment
- TH IEC 60068-2-30
- Control Circuit Voltage
- 120 V AC 50/60 Hz
- Utilisation Category
- AC-3; AC-1
- Heat Dissipation
- 2 to 3 W 50/60 Hz
- Interlocking Type
- Electrical and mechanical
- Front Cover
- With
- Ambient Air Temperature For Storage
- -76 to 176°F (-60 to 80°C)
- Inrush Power in VA
- 70 VA 60 Hz cos phi 0.75 (at 68°F (20°C)); 70 VA 50 Hz cos phi 0.75 (at 68°F (20°C))
- Safety Reliability Level
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Mechanical Robustness
- Vibrations contactor open2 Gn, 5 to 300 Hz; Vibrations contactor closed4 Gn, 5 to 300 Hz; Shocks contactor open10 Gn for 11 ms; Shocks contactor closed15 Gn for 11 ms
- Pole Contact Composition
- 3 NO
Create Account
