Peak Output Power
12,000 W
Continuous Output Power
6,000 W
Inverter Output Form
Pure Sine Wave
Inverter Input Voltage
48V DC; 208V AC; 230V AC
Inverter Output Voltage
208/230V AC
DC Connection
Bolt Down Terminals
Standards
Tested to EN62040-1 (CE), EN62040-2 (EMC), RoHS compliant
Features
Battery Temperature Sensor; Expandable Runtime; Overvoltage Correction; Pure Sine Wave Output
Nominal Output Power
6,000 W
Inveter Output Voltage
208V; 230V
Output Frequency
50/60 Hz
Package Contents
PowerVerter APSX6048VRNET Power Inverter, Instruction Manual with Warranty Information
Output Voltage
208 V AC, 230 V AC
Input Voltage
208 V AC, 230 V AC, 48 V DC
Product Name
PowerVerter APSX6048VRNET Power Inverter
Voltage Compatibility (VDC)
48
Severe Brownout Correction
Input voltages from 188V - 171V are automatically boosted by 26% (230V only)
DC System Voltage (VDC)
48
Transfer Time (Line Power to Battery Mode)
Dip-switch selectable 20 millisecond (full cycle) / 10 millisecond (half-cycle) transfer times which are compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications
Voltage Regulation Description
Includes automatic voltage regulation to correct brownouts and over-voltages back to usable levels
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Voltage Compatibility (VAC)
208; 230
High Voltage Transfer to Battery Power
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 260V (user adjustable to 270 - see manual), In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 235V (user adjustable to 245V-see manual)
SNMP Compatibility
Optional SNMPWEBSOLOHV accessory card enables remote monitoring of the unit via SNMP, SSH, telnet or Internet.
Nominal Input Voltage(s) Supported
208V AC; 230V AC
Product Certifications
IEC/EN 62040
Brownout Correction
Input voltages from 208V -189V are automatically boosted by 11% (230V) / Input voltages from 188V-166V are automatically boosted 12% (208V)
Relative Humidity
0%-95% Non-Condensing
Output Frequency Regulation
50/60 Hz (+/- 0.3 Hz)
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
Output Receptacles
Hardwire
Grounding
Main grounding lug connects inverter/charger to earth or vehicle chassis ground
Recommended Electrical Service
DC INPUT: Requires 48VDC input source capable of delivering 138A for the required duration (when used at full continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive applications, professional hardwire installation with 250A minimum battery system fusing is recommended.
Nominal Output Voltage(s) Supported
208V; 230V
Battery Temperature Sensor
RJ-11 port connects to optional battery temperature sensor cable to regulate the charging system based on battery temperature
Frequency Compatibility
50 / 60 Hz
Overvoltage Correction
Input voltages above 252V are automatically reduced by 9% (230V) / Input voltages above 235/245V are automatically reduced by 10% (208V)
Low Voltage Transfer to Battery Power
In 230V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 170V AC (user adjustable to 180V). In 208V AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 165V (user adjustable to 175V)-see manual
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Output Voltage Regulation
LINE POWER (AC): Maintains 208/230V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains sine wave output voltage of 208/230 VAC (+/-5%).
Generator Start Compatibility
RJ-11 port connects to a generator with user-supplied cable to automatically cycle generator when battery level is low
Product Compliance
CE (Europe)
Material of Construction
Metal
Package Includes
APSX6048VRNET 6000W APS X Series 48V DC 208/230V AC Inverter/Charger;Owner's manual
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Communications Interface
Contact closure; DB9 Serial
Battery Charge
Selectable 23 / 90A
