166 Results for Cutting, Tapping, and Grinding Fluids by TRIM
Key Features:
- Container Size: 5 gal
- Series: E206
- Item: Coolant
Key Features:
- Container Size: 5 gal
- Item: Cutting Oil
- Physical Form: Liquid
Key Features:
- Container Size: 5 gal
- Item: Coolant
- Fragrance: Low Odor, Mild Odor
Key Features:
- Container Size: 5 gal
- Features: And Fixtures , Chucks, Coolant Residue Is Easily Removed With Either Water, Leaves A Fluid, Nongumming Film To Prevent Sticky Ways, Or Aqueous Cleaners, Proven To Be Highly Effective In Controlling Built-Up Edge, Tool Holders, Working Solution
- Container Style: Pail
Key Features:
- Container Size: 5 gal
- Size: 5 gal.
- pH Value: 8.8 to 9.7
Key Features:
- Container Size: 5 gal
- Fragrance: Mild Amine
- Series: 690XT
Key Features:
- Container Size: 5 gal
- Item: Cutting and Grinding Fluid
- Container Style: Pail
Key Features:
- Container Size: 5 gal
- Container Type: Bucket
- Physical Form: Liquid
Key Features:
- Container Size: 5 gal
- Item: Cutting and Grinding Fluid
- Application: Cooling, Corrosion Inhibition, Drilling, Grinding, High Speed Turning, Reaming, Tapping
Key Features:
- Container Size: 1 gal
- Physical Form: Liquid
- Container Style: Jug
Key Features:
- Container Size: 5 gal
- Item: Cutting and Grinding Fluid
- Physical Form: Liquid
Key Features:
- Container Size: 5 gal
- Item: Cutting Oil
- Application: Band Sawing, Cold Sawing, Drilling, Hack Sawing, Reaming, Roll Threading, Tapping, Thread Forming
Key Features:
- Container Size: 54 gal
- Specific Gravity: 1
- Fluid Properties: Chlorine Free
Key Features:
- Container Size: 2 qt
- Fluid Type: Low Foam, Silicone Free
- Application: Tank Side Add to Control Foam in Water Miscible Coolants, Washing Compounds and Floor Soaps
Key Features:
- Container Size: 5 gal
- Application: Machining on High Silica Aluminum Alloys, Magnesium and Copper Alloys, Cast Iron, Steels, Stainless Steels and Many Plastics and Composites
- Fragrance: Mild Odor
Key Features:
- Container Size: 1 gal
- Container Type: Jug
- Fluid Properties: Chlorine Free, Emulsion
Key Features:
- Container Size: 1 gal
- Item: Machining Fluid Additive
- Standards: ASTM D92-90
Key Features:
- Container Size: 16 oz
- Item: Tapping Fluid
- Physical Form: Liquid
Key Features:
- Item: Cutting Oil
- Container Size: 1 gal
- Color: Amber
Key Features:
- Color: Colorless to Pale Yellow
- Base Oil: Synthetic
- Application: As Well As Plastics And Composites Grinding, Cooling And Chip Settling On Cast Iron, Drilling, Steels And Copper Alloys, Tapping And Reaming Operations
Key Features:
- Container Size: 16 oz
- Item: Tapping Fluid
- For Use With: High Lubricity Taps
Key Features:
- Container Size: 1 gal
- Application: Grinding, Drilling, Tapping And Reaming On Cast Iron, Steels, Copper Alloys, Plastics, And Composites Not Recommended Magnesium Or Zirconium
- Base Oil: Semi-Synthetic
Key Features:
- Container Size: 5 gal
- Features: Environmentally Friendly, Minimum Quantities Of Material At The Point Of Cut For High Material Removal Rates, Promotes Superior Finish And Tool Life And Is Compatible With All Materials, Renewable Resource Based, Very High Levels Of Lubricity With Even
- Fragrance: Mild Odor
Key Features:
- Fluid Type: SC536
- Features: Corrosion Inhibition, Exceptional Sump Life And Very Good Tramp Oil Rejection, Extremely Low Carry Off For Very Low Total Operating Costs, Low Foam And Low Mist, Minimizes The Buildup Of Sticky Residues
- pH Value: 9.4 to 9.8 (Operating), 9.5 to 10.5 (Concentrate)
Key Features:
- Fluid Properties: Chlorine Free, Copper Free, Low Foam, Nitrite Free, Phenol Free, Silicone Free, Triazine Free
- Container Size: 54 gal
- Fragrance: Mild Odor
Key Features:
- Container Size: 1 gal
- Specific Gravity: 0.99
- Base Oil: Water Based
Key Features:
- Container Size: 54 gal
- Specific Gravity: 0.99
- Physical Form: Liquid
Key Features:
- Container Size: 54 gal
- Item: Machining Fluid Additives
- Container Type: Drum
Key Features:
- Item: Synthetic Coolant,Clear,5 gal.
Key Features:
- Container Size: 2 qt
- Fragrance: Slight Surfactant
- Base Oil: Water Based
Key Features:
- Container Size: 1 gal
- Color: Opaque Green
- Specific Gravity: 0.99
Key Features:
- Container Size: 1 gal
- pH Value: 8.7 to 9.7
- Physical Form: Liquid
Key Features:
- Container Type: Drum
- Specific Gravity: 1
- Color: Yellow
Key Features:
- Container Size: 1 gal
- Features: Compatible with Copper Containing Alloys, Ester Based Formulation Ensures Very Low Misting Potential, Excellent Extreme-Pressure Additive Package for Efficient Metal Removal, Extremely High Lubricity Ensures Fantastic Tool Life, Good Oxidation Stability, Light Color, Low Odor for Good Operator Acceptance, Low Viscosity Ensures Excellent Chip Removal In Deep-Hole Drilling, Very High Flash Point
- Application: Deep Hole Drilling, Drilling, Gear Cutting, Gun Drilling, Milling, Reaming, Tapping, Turning
Key Features:
- Container Size: 54 gal
- Size: 54 gal.
- Fragrance: Mild Odor
About Cutting, Tapping, and Grinding Fluids
Cutting, tapping, and grinding fluids are used in a variety of industries to help reduce friction, heat buildup, and wear on metalworking tools. These fluids can be used to lubricate cutting tools and surfaces while also providing cooling properties that can help prevent the formation of chips or burrs during machining operations.
Types of Cutting, Tapping, and Grinding Fluids
Cutting fluids come in a range of types including water-soluble oils, straight oils, semi-synthetic products, synthetic products, and misting systems. Each type of fluid has its own unique characteristics that make it suitable for specific applications such as tapping or grinding. For example, water-soluble oils provide better cooling than straight oils but may not offer the same protection against corrosion.
How Cutting, Tapping, and Grinding Fluids are Made
Cutting fluids are typically made up of a base oil combined with emulsifiers or surfactants to create an emulsion. Additives such as corrosion inhibitors or extreme pressure additives may also be added to enhance performance. The ingredients are blended together using specialized equipment before being tested for quality assurance.
Industries that use Cutting, Tapping, and Grinding Fluids
Cutting fluids are commonly used in manufacturing industries such as automotive production lines where they are applied directly onto parts prior to machining operations. They can also be used in welding processes where they provide lubrication between two surfaces being joined together by heat. In addition to this they can also be used for general purpose lubrication when drilling holes into metals.
Find the Cutting, Tapping, And Grinding Fluids You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of cutting, tapping, and grinding fluids, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.