- MFR #
- 5PXX9
- Zoro #
- G0400784
- UPC #
- 190735350270
- Country of Origin
- China
- HP - Pumps
- 1/4 hp
- Voltage - Pumps
- 115V AC
- Phase - Pumps
- 1
- Housing Material - Pumps
- Aluminum
- Max. Pressure - Pumps
- 5 psi
- Max. Head
- 11 ft
- Motor Enclosure - Pumps
- Open Dripproof
- Duty
- Continuous
- Port Rotation
- 90 Degrees Increments
- Voltage
- 115
- Impeller Material
- Aluminum
- Item
- Centrifugal Pump
- GPM of Water @ 10 Ft. of Head
- 4
- Frame
- 48Z
- Hz
- 60
- GPM @ 1 Ft. of Head
- 24
- Motor Type
- Split-Phase
- Housing Material
- Aluminum
- Item - Straight Centrifugal Pumps
- Straight Centrifugal High Flow Pump
- GPM of Water @ 0 Ft. of Head
- 25
- Amps
- 4.5
- Impeller Type
- Open
- GPM @ 7 Feet of Head
- 13
- Max. Case Pressure
- 200 psi
- HP
- 1/4
- Motor Enclosure
- Open Drip Proof
- Wetted Materials
- Aluminum, Buna-N, Carbon, Ceramic, Stainless Steel
- Includes
- Manual
- Outlet
- 1-1/4" NPT
- Min. GPM @ Head
- 4 @ 10 ft
- Inlet Pressure
- 45 psi
- Max. Specific Gravity
- 1
- Inlet
- 1-1/4" NPT
- Motor RPM
- 1725
- Phase
- Single
- Agency Compliance
- CUS (Motor Only)
- Best Efficiency GPM @ Head
- 10 gpm @ 8 ft
- GPH of Water @ 5 Ft. of Head
- 1,080
- Max. Pressure
- 4.8 psi
- Bearing Type
- Ball
- GPM of Water @ 5 Ft. of Head
- 18
- Best Efficiency Range GPM @ Head
- 4 to 23 gpm @ 10 to 2 ft
- Seal Material
- Carbon, Ceramic, NBR
- Max. Liquid Temp.
- 180 Degrees F
- Max. GPM @ Head
- 23 @ 2 ft
- Standards
- CUS Certified (Motor Only)
- Best Efficiency Flow
- 10 gpm
- Maximum RPM
- 1,725 RPM
- Impeller Design
- Semi-Open
- Wetted Material
- Aluminum, Buna-N, Carbon, Ceramic, Stainless Steel
- Discharge Type
- NPT
- Duty Cycle
- Continuous
- Discharge Rotation
- 90 Degrees Increments
- Specific Gravity (Maximum)
- 1
- Frequency
- 60 Hz
- Motor Frame Designation
- 48Z
- Intake Type
- NPT
- Nameplate Voltage
- 115V AC
- Shut Off Pressure (Maximum)
- 5 psi
- Flow Rate @ 1 ft of Head (Maximum)
- 24 gpm
- Seal Type
- Mechanical
- Flow Rate @ 10 ft of Head (Maximum)
- 4 gpm
- Maximum Flow Rate
- 23 gpm
- Horsepower
- 1/4 hp
- Motor Ambient Temperature (Maximum)
- 104 Degrees F
- Maximum Media Temperature
- 180 Degrees F
- Best Efficiency Head
- 8 ft
- For Use With Potable Systems
- No
- Pump Housing Material
- Aluminum
- Shaft Material
- Carbon Steel
- Maximum Feet of Head
- 11 ft
- Flow Rate @ 5 ft of Head (Maximum)
- 18 gpm
- Volute Material
- Aluminum
- Hazardous Location Class
- Not Rated
- Inlet Position
- Center
- Shaft Seal Type
- Mechanical
- Media Temperature - Minimum
- 40 Degrees F
- Mounting Orientation
- Horizontal
- Shaft Seal Material
- Carbon/Ceramic, Buna-N
- Drive Coupling Type
- No Coupling
- Feet of Head (Maximum)
- 11 ft
- Features
- Durable,and easily cleaned
- Discharge Position
- Center
- Inlet Orientation
- Side
- Pump Design
- End Suction
- Motor Speed - Maximum
- 1,725 RPM
- Media Temperature - Maximum
- 180 Degrees F
- Thermal Overload Protection
- Yes
- Flow Rate (Maximum)
- 23 gpm
- Chemical Compatibility
- Non-Abrasive Liquids, Non-Flammable Liquids
- Full Load Current
- 4.5A
- Priming
- Manual
- Feet of Head (Minimum)
- 0 ft
- Discharge Orientation
- Top
- Number of Stages
- 1
- Ambient Temperature - Minimum
- 40 Degrees F
- Shut Off Pressure - Maximum
- 5 psi
- Discharge Rotation Increments
- 90 Degrees
- Flow Rate @ 10 ft of Head - Maximum
- 4 gpm
- Ambient Temperature - Maximum
- 104 Degrees F
Create Account
