Shop DAYTON

Turbine Pump, 1/3 HP, 115 to 230V, 3450 rpm

  • Mfr # 53EA94

  • Zoro # G2042813

product price:  $527.99
/ea
Free Shipping & Returns

Key Features

HP
1/3 hp
Voltage
115/230
Wetted Materials
Bronze, Buna-N, Carbon, Ceramic and 304 Stainless Steel
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
See all product information
Get a 10% off coupon
Free 30-day returns Return Policy
Get 30 days to pay with Net 30 Apply Now
Unlock tax-exempt savings Add Tax Exemption

Specifications

Product Information

MFR #
53EA94
Zoro #
G2042813
UPC #
190735938072
Country of Origin
India

Dimensions

Manufacturers Warranty Length
1 yr
Max. Dia. Solids
0.25 Microns
Width
6 1/2 in
Height
6 5/16 in
Manufacturer Warranty Length
1 yr
Compatible Intake Pipe Size
3/4 in
Overall Width
6.5 in
Solid Diameter (Maximum)
0.25 micron
Compatible Discharge Pipe Size
3/4 in
Overall Height
6.31 in
Inlet Diameter
3/4 in
Discharge Diameter
3/4 in
Motor Frame Size
56J

Details

HP
1/3 hp
Voltage
115/230
Wetted Materials
Bronze, Buna-N, Carbon, Ceramic and 304 Stainless Steel
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
Impeller Type
Regenerative Turbine
Overload Protection
yes
Motor RPM
3,450 RPM
GPM @ 40 PSI
1.7
Duty
Continuous
Item
Turbine Pump
Max. Specific Gravity
1
Hz
60
GPM @ 50 PSI
1.5
GPM @ 60 PSI
1.3
Motor Ambient Temp. Rating
40 Degrees C
Best Efficiency GPM @ Head
1.0 @ 75 psi
Housing Material
Bronze
Best Efficiency GPM @ PSI
1.0 @ 75
GPM @ 100 PSI
0.7
GPM @ 75 PSI
1.0
Max. Case Pressure
200 psi
Port Rotation
90 Degrees Increments
Inlet Pressure
150 psi
Max. Liquid Temp.
230 Degrees F
Installation Position
Horizontal
Motor Type
Capacitor-Start/Run
GPM @ 20 PSI
2.2
Phase
Single
GPM @ 30 PSI
2.0
GPM @ 80 PSI
0.9
Inlet (In.)
3/4 NPT
Motor Enclosure
Open Drip Proof
Thermal Protection
yes
Agency Compliance
UL Listed
Frame
56J
GPM @ 90 PSI
0.8
Impeller Material
Bronze
Pump RPM
3,450
Outlet
3/4 in NPT
GPM @ 10 PSI
2.5
Bearing Type
Ball
Inlet
3/4 in NPT
Amps
7.5/3.8
Flow Rate @ 30 psi
2 gpm
NPSHr
150 psi
Thermal Overload Protection
Yes
Flow Rate @ 80 psi
0.9 gpm
Maximum Flow Rate
2.5 gpm
Flow Rate @ 70 psi
1.1 gpm
Horsepower
1/3 hp
Impeller Design
Peripheral Vaned
Standards
UL Recognized Motor
Motor Frame Designation
56J
Flow Rate @ 100 psi
0.7 gpm
Maximum RPM
3,450 RPM
Intake Type
NPT
Shut Off Pressure (Maximum)
120 psi
Nameplate Voltage
115/230V AC
Flow Rate @ 90 psi
0.8 gpm
Case Pressure (Maximum)
200 psi
Discharge Type
NPT
Maximum Media Temperature
230 Degrees F
Wetted Material
304 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic
Pump Housing Material
Bronze
Motor Ambient Temperature (Maximum)
104 Degrees F
Duty Cycle
Continuous
Flow Rate @ 50 psi
1.5 gpm
Best Efficiency Head
75 ft
Flow Rate @ 40 psi
1.7 gpm
Features
Seals and an Easily Accessible Drain Plug, Spray Equipment
Specific Gravity (Maximum)
1
Flow Rate @ 20 psi
2.2 gpm
Seal Type
Mechanical
Mounting Orientation
Horizontal
Flow Rate @ 10 psi
2.5 gpm
Flow Rate @ 15 psi
2.3 gpm
Compatible with Media Type
Non-Flammable Liquids, Water
Minimum Flow Rate
0.7 gpm
Frequency
60 Hz
Flow Rate @ 60 psi
1.3 gpm
Electrical Connection Type
Hardwired
Priming
Self-Priming
Power Source
Electric Motor
Flow Rate (Minimum)
0.7 gpm
Case Pressure - Maximum
200 psi
Pumping Application
Boiler Feed, Condensate Return, Liquid Transfer, Booster Service, Reverse Osmosis and Water Treatment
Feet of Head (Maximum)
100 ft
Chemical Compatibility
Non-Flammable Liquids, Water
Full Load Current
7.5/3.8
Operation
Manual
Shaft Seal Type
Mechanical
Best Efficiency Flow
1.5 gpm
Motor Design
Capacitor-Start/Run
Shut Off Pressure - Maximum
120 psi
Media Temperature - Minimum
-20 Degrees F
Media Temperature - Maximum
230 Degrees F
Flow Rate (Maximum)
2.5 gpm
Shaft Seal Material
304 Stainless Steel/Buna-N/Carbon/Ceramic
Ambient Temperature - Maximum
104 Degrees F
Pump Design
Regenerative Turbine
Number of Stages
1
Power Source - TS Only
Electric Motor

Description

Turbine Pump, Phase Single, Pump Housing Material Bronze, Motor Enclosure Open Drip Proof, Horsepower 1/3 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 120 psi, Maximum Flow Rate 2.5 gpm, Flow Rate @ 10 psi 2.5 gpm, Flow Rate @ 20 psi 2.2 gpm, Flow Rate @ 30 psi 2 gpm, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in, Discharge Type NPT, Motor Type Capacitor-Start/Run, Best Efficiency Head 75 ft, Case Pressure (Maximum) 200 psi

Restrictions

WARNING: Cancer and Reproductive Harm For more information go to www.P65Warnings.ca.gov

Ratings & reviews

3 reasons you can count on us

  • Supplies for every job.

    10 million items and the exact one you need.

  • When you need it fast, count on Zoro!

    2 million products ship in 1 day.

  • Stretch your budget further.

    Everyday low prices on the brands you love.

Explore more products