- MFR #
- SP10V-T-FF-3-M219
- Zoro #
- G123354513
- UPC #
- -
- Country of Origin
- United States
- Item
- Magnetic Drive Pump
- Horsepower (Maximum)
- 1 hp
- Inlet Standard
- Flange
- Nameplate Voltage
- 208-230/460V AC
- Housing Material
- PVDF
- Shaft Seal Type
- Sealless
- NPSHr
- 11 ft
- Drive Coupling Type
- Magnetic Coupling
- Media Temperature - Maximum
- 220 Degrees F
- Pump Mounting Style
- Base-Mounted, Foot-Mounted
- Number of Stages
- 1
- Media Temperature - Minimum
- 35 Degrees F
- Motor Speed (Maximum)
- 3,450 RPM
- Pump Drive Configuration
- Close-Coupled
- Feet of Head (Maximum)
- 50 ft
- Full Load Current
- 3.4-3.0/1.5A
- Case Pressure - Maximum
- 80 psi
- Best Efficiency Head
- 38 ft
- Ambient Temperature - Maximum
- 220 Degrees F
- Discharge Rotation Increments
- 0 Degrees
- Priming
- Self-Priming
- Ambient Temperature - Minimum
- -20 Degrees F
- Shut Off Pressure - Maximum
- 21.6 psi
- Motor Design
- Three-Phase
- Hazardous Location Class
- Class I Division 2
- Chemical Compatibility
Acetic Acid 80%,Ammonium Hydroxide,Antifreeze,Transmission Fluid,Calcium Chloride,Acetic Acid 20%,Chromic Acid 10%,Citric Acid 50%,Deionized Water,Ethylene Glycol,Fertilizer,Water,Fungicide,Herbicide,Hydrogen Peroxide up to 50%,Nitric Acid,Phosphoric Acid 50%,Saltwater,Sodium Bicarbonate 10%,Sodium Bisulfate,Sodium Bisulfite,Sodium Hypochlorite 12.5%,Sulfuric Acid 1% to 98%
- Phase
- Three
- Mounting Orientation
- Horizontal
- Impeller Material
- Polypropylene
- Pumping Application
- Chemical Transfer, Liquid Transfer
- Specific Gravity (Maximum)
- 1.8
- Best Efficiency Flow
- 34 gpm
- Viscosity (Maximum)
- 50 cps
- Gasket Material
- FKM
- Motor Enclosure
- Totally Enclosed Fan Cooled
- Pump Design
- End Suction
- Frequency
- 50/60 Hz
- Discharge Standard
- Flange
- Flow Rate (Maximum)
- 55 gpm
Create Account