- MFR #
- DB10P-W-B
- Zoro #
- G123353523
- UPC #
- -
- Country of Origin
- United States
- Flow Rate (Maximum)
- 40 gpm
- Best Efficiency Flow
- 60 gpm
- Impeller Material
- Polypropylene
- Viscosity (Maximum)
- 150 cps
- Product Type
- Wetend Kit
- Pump Drive Configuration
- Close-Coupled
- Media Temperature - Maximum
- 180 Degrees F
- NPSHr
- 8 ft
- Pumping Application
- Chemical Transfer, Liquid Transfer
- Pump Shaft Rotation Direction
- CW
- Discharge Rotation Increments
- 0 Degrees
- Priming
- Manual
- Shaft Material
- Ceramic
- Shaft Seal Type
- Sealless
- Motor Speed (Maximum)
- 3,450 RPM
- Chemical Compatibility
Acetic Acid 20%,Acetic Acid 80%,Ammonium Hydroxide,Antifreeze,Calcium Chloride,Citric Acid 50%,Deionized Water,Ethylene Glycol,Fertilizer,Water,Fungicide,Herbicide,Hydrochloric/Muriatic Acid 100%,Hydrochloric/Muriatic Acid 20%,Hydrochloric/Muriatic Acid 37%,Phosphoric Acid 40%,Potassium Hydroxide 50%,Saltwater,Sodium Bicarbonate 10%,Sodium Bisulfate,Sodium Bisulfite,Sodium Hydroxide/Caustic Soda 20%,Sodium Hydroxide/Caustic Soda 50%,Sodium Hydroxide/Caustic Soda 80%,Sulfuric Acid 10% to 70%,Sulfuric Acid 10%
- Standards
- CE, EN 809, EN ISO 12100
- Compatible with Brand
- Finish Thompson
- Volute Material
- Polypropylene
- Suction Lift (Maximum)
- 0 ft
- Compatible with Pump Type
- Chemical Transfer Magnetic Drive Pump
- Shaft Seal Material
- FKM
- Flow Rate (Minimum)
- 0.5 gpm
- Shut Off Pressure - Maximum
- 21.6 psi
- Series Family
- DB10
- Feet of Head (Maximum)
- 50 ft
- Pump Housing Material
- Polypropylene
- Ambient Temperature - Maximum
- 180 Degrees F
- Best Efficiency Head
- 44 ft
- Specific Gravity (Maximum)
- 1.8
Create Account