Item
Motor Starter Power Base
Auxiliary Contact Form
1NC/1NO
Coil Voltage
110V-240V AC/DC
Reversing Capability
Reversing
Terminal Connection Type
Screw Clamp
Standards
CCC, CSA, EAC, Green Premium RoHS/REACH, UL Listed
HP @ 3 Phase - 575V
10 hp
Features
Mercury Free; Resistance to Fire, Electrostatic Discharge, Fast Transients, Radiated Fields, Shock & Vibration; Suitability For Isolation
Operating Voltage
690V AC
Compatible with Series
TeSys Ultra
Horsepower @ Three Phase - 240V AC
3 hp
Horsepower @ Three Phase - 600V AC
10 hp
Horsepower @ Three Phase - 208V AC
3 hp
Horsepower @ Three Phase - 480V AC
7 1/2 hp
Maximum Overload Relay Current Setting
12:00 AM
Horsepower @ Single Phase - 120V AC
1 1/2 hp
NEMA Enclosure Rating
No Enclosure
Horsepower @ Single Phase - 240V AC
2 hp
Maximum Voltage Rating
690V AC
Safety Reliability Level
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1; B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Fixing Mode
Clipped DIN rail; Screw-fixed plate)
Shock Resistance
10 gn power poles open IEC 60068-2-27; 15 gn power poles closed IEC 60068-2-27
Rated Service Breaking Capacity
50 kA 230 V; 50 kA 440 V; 10 kA 500 V; 4 kA 690 V
Typical Current Consumption
1000 mA 110 to 220 V DC I maximum while closing; 1000 mA 110 to 240 V AC I maximum while closing
Operating Time
150 ms with change of direction power circuit; 35 ms opening control circuit; 75 ms without change of direction power circuit; 50 ms closing control circuit
Inrush Restraint Duration
25 ms AC 50/60 Hz; 15 ms DC
Rated Insulation Voltage
690 V IEC 60947-6-2 3; 600 V UL 60947-4-1; 600 V CSA C22.2 No 60947-4-1
Control Circuit Voltage Limits
55 V DC drop-out; 55 V AC drop-out; 88 to 242 V DC in operation; 88 to 264 V AC in operation
Resistance To Fast Transients
2 kV 3 serial link IEC 61000-4-4; 4 kV 4 all circuits except for serial link IEC 61000-4-4
Resistance To Radiated Fields
9.14 V/m (10 V/m) 3 IEC 61000-4-3
Operating Altitude
6561.68 ft (2000 m)
Safe Separation Of Circuit
400 V SELV between the control and auxiliary circuits IEC 60947-1 appendix N; 400 V SELV between the control or auxiliary circuit and the main circuit IEC 60947-1 appendix N
Maximum Operating Rate
3600 cyc/h
Fire Resistance
1760°F (960°C) parts supporting live components IEC 60695-2-12; 1202°F (650°C) IEC 60695-2-12
Immunity To Radioelectric Fields
10 V IEC 61000-4-6
Protective Treatment
TH IEC 60068
Utilisation Category
AC-43; AC-44; AC-41
Conventional Free Air Thermal Current
12 A
Tightening Torque
Control circuit 7.08 to 10.62 lbf.in (0.8 to 1.2 N.m) flat 0.20 in (5 mm); Control circuit 7.08 to 10.62 lbf.in (0.8 to 1.2 N.m) Philips no 1 0.20 in (5 mm); Power circuit 16.82 to 22.13 lbf.in (1.9 to 2.5 N.m) flat 0.24 in (6 mm); Power circuit 16.82 to 22.13 lbf.in (1.9 to 2.5 N.m) Philips No 2 0.24 in (6 mm); Power circuit 16.82 to 22.13 lbf.in (1.9 to 2.5 N.m) pozidriv No 2 0.24 in (6 mm)
Auxiliary Contacts Type
Linked contacts 1 NO + 1 NC) IEC 60947-4-1; Mirror contact 1 NC) IEC 60947-1
Vibration Resistance
2 gn 5 to 300 Hz) power poles open IEC 60068-2-27; 4 gn 5 to 300 Hz) power poles closed IEC 60068-2-27
Control Circuit Voltage
110 to 240 V AC 50/60 Hz; 110 to 220 V DC
Immunity To Voltage Dips
70% / 500 ms IEC 61000-4-11
Suitability For Isolation
Yes
IP Degree Of Protection
IP20 IEC 60947-1 front panel and wired terminals); IP20 IEC 60947-1 other faces); IP40 IEC 60947-1 front panel outside connection zone)
Resistance To Electrostatic Discharge
8 kV 3 in open air IEC 61000-4-2; 8 kV 4 on contact IEC 61000-4-2
Immunity To Microbreaks
3 ms control circuit
Connections - Terminals
Control circuit screw clamp terminals 1 0.00 to 0.00 in² (0.34 to 1.5 mm²) flexible with cable end; Control circuit screw clamp terminals 1 0.00 to 0.00 in² (0.75 to 1.5 mm²) flexible without cable end; Control circuit screw clamp terminals 1 0.00 to 0.00 in² (0.75 to 1.5 mm²) rigid; Control circuit screw clamp terminals 2 0.00 to 0.00 in² (0.34 to 1.5 mm²) flexible with cable end; Control circuit screw clamp terminals 2 0.00 to 0.00 in² (0.75 to 1.5 mm²) flexible without cable end; Control circuit screw clamp terminals 2 0.00 to 0.00 in² (0.75 to 1.5 mm²) rigid; Power circuit screw clamp terminals 1 0.00 to 0.02 in² (1 to 10 mm²) rigid; Power circuit screw clamp terminals 1 0.00 to 0.01 in² (1 to 6 mm²) flexible with cable end; Power circuit screw clamp terminals 1 0.00 to 0.02 in² (2.5 to 10 mm²) flexible without cable end; Power circuit screw clamp terminals 2 0.00 to 0.01 in² (1 to 6 mm²) flexible with cable end; Power circuit screw clamp terminals 2 0.00 to 0.01 in² (1 to 6 mm²) rigid; Power circuit screw clamp terminals 2 0.00 to 0.01 in² (1.5 to 6 mm²) flexible without cable end
Ambient Air Temperature For Storage
-40 to 185°F (-40 to 85°C)
Mechanical Durability
15 Mcycles
Non-Dissipating Shock Wave
1 kV serial mode IEC 60947-6-2; 2 kV common mode IEC 60947-6-2
Heat Dissipation
2 W control circuit with LUCA, LUCB, LUCC, LUCD; 1.7 W control circuit with LUCM
Rated Operational Current
12 A Less than or Equal to 440 V; 12 A 500 V; 9 A 690 V
Rated Impulse Withstand Voltage
6 kVIEC 60947-6-2
Minimum Operating Temperature
-13 Degrees F
Compatible Manufacturer Model Number
LUC.X6FU; LUC.1XFU; LUC.05FU; LUC.12FU
Maximum Operating Temperature
140 Degrees F
