- Item
- Voltage Relay
- Item - Relay
- Voltage Sensing Relay
- Coil Volts
- 250VAC/DC
- Standards
- EN/IEC 60255-6
- Product Or Component Type
- voltage control relay
- Relay Name
- RM35UA
- Tightening Torque
- 0.6-1 N.m IEC 60947-1
- Sensitivity Scale
- 15...150 V E1-M terminals || 30...300 V E2-M terminals || 60...600 V E3-M terminals
- Overvoltage Category
- III IEC 60664-1
- Measurement Range
- 15...600 V voltage
- Control Circuit Frequency
- 40...70 Hz +/- 10 %
- Immunity To Microbreaks
- 10 ms
- Vibration Resistance
- 0.35 mm 5-57.6 Hz)IEC 60068-2-6 || 1 gn 57.6-150 Hz)IEC 60255-21-1
- [Us] Rated Supply Voltage
- 24...240 V AC/DC 50/60 Hz +/- 10 %
- Operating Position
- any position without derating
- Local Signalling
- for power ON LED (green) || for relay ON LED (yellow)
- Supply Voltage Limits
- 20.4-264 V AC/DC
- Output Contacts
- 2 C/O
- Mechanical Durability
- 30000000 cycles
- Shock Resistance
- 5 gn IEC 60068-2-27
- Maximum Power Consumption In W
- 0.6 W DC
- Utilisation Category
- AC-12 IEC 60947-5-1 || AC-13 IEC 60947-5-1 || AC-14 IEC 60947-5-1 || AC-15 IEC 60947-5-1 || DC-12 IEC 60947-5-1 || DC-13 IEC 60947-5-1 || DC-14 IEC 60947-5-1
- Insulation Resistance
> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 || > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 || > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 || > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 || > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 || > 1 MOhm 500 V DC between supply and measurement IEC 60664-1
- Quality Labels
- CE
- Maximum Measuring Cycle
- 30 ms measurement cycle as true rms value
- Electromagnetic Compatibility
- emission standard for industrial environments EN/IEC 61000-6-4 || emission standard for residential, commercial and light-industrial environments EN/IEC 61000-6-3 || immunity for industrial environments NF EN/IEC 61000-6-2
- Mounting Support
- 35 mm symmetrical DIN rail conforming to EN/IEC 60715
- Contacts Type And Composition
- 2 C/O
- Relay Type
- multifunction voltage control relay
- Compatibility Code
- RM3
- Product Certifications
- GOST || UL || GL || C-tick || CSA
- Reset Time
- 1500 ms time delay
- [Ui] Rated Insulation Voltage
- 250 V IEC 60664-1 || 600 V IEC 60664-1
- Hysteresis
- 5-50 % threshold setting
- Time Delay Type
- adjustable 0.3...30 s, 0 + 10 % on crossing the threshold
- Switching Capacity In Va
- 1250 VA
- Polarity
- non reversible polarity on DC supply
- Housing Material
- self-extinguishing plastic
- Ip Degree Of Protection
- IP20 IEC 60529 terminals) || IP30 IEC 60529 casing)
- Relay Monitored Parameters
- overvoltage or undervoltage detection
- Ambient Air Temperature For Storage
- -40-70°C
- Power Consumption In Va
- 0-3.5 VA AC
- Run-Up Delay At Power-Up
- 600 ms
- Connections - Terminals
screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end || screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end || screw terminals, 1 x 0.2...2 x 2.5 mm² AWG 24...AWG 12) flexible with cable end || screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
- Repeat Accuracy
- +/- 0.5 % input and measurement circuit || +/- 2 % time delay
- Control Circuit Voltage Limits
- 15 % + 10 % Un
- Non-Dissipating Shock Wave
- 4 kV IEC 60255-5 || 4 kV IEC 60664-1 || 4 kV IEC 61000-4-5
- Measurement Error
- +/- 0.05 %/°C with temperature variation || < 1 % over the whole range with voltage variation
- Minimum Switching Current
- 10 mA 5 V DC
- Resistance Across Terminals
- 150 mOhm E1-M terminals || 300 mOhm E2-M terminals || 600 mOhm E3-M terminals
- Electrical Durability
- 100000 cycles
- Nominal Output Current
- 5A
- Ambient Air Temperature For Operation
- -20-50°C
- Pollution Degree
- 3 IEC 60664-1
- Relative Humidity
- 95-95 % 55-55°C IEC 60068-2-30
- Operating Rate
- <= 360 operations/hour full load
- Maximum Switching Voltage
- 250 V AC/DC
- Measurement Accuracy
- +/- 10 % of the full scale value
- Threshold Setting
- 10...100 %
- Dielectric Test Voltage
- 2 kV AC 50 Hz, 1 min IEC 60255-5 || 2 kV AC 50 Hz, 1 min IEC 60664-1
- Maximum Switching Current
- 5 A AC/DC
- Control Type
- without test button
- Range of Product
- Harmony Control Relays
Create Account
