Shop DAYTON

Turbine Pump, 1/2 HP, 115 to 230V, 3450 rpm

  • Mfr # 53EA95

  • Zoro # G2042770

product price:  $771.99
/ea
Free Shipping & Returns

Key Features

HP
1/2 hp
Voltage
115/230
Wetted Materials
Bronze, Buna-N, Carbon, Ceramic and 304 Stainless Steel
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
See all product information
Get a 10% off coupon
Free 30-day returns Return Policy
Get 30 days to pay with Net 30 Apply Now
Unlock tax-exempt savings Add Tax Exemption

Specifications

Product Information

MFR #
53EA95
Zoro #
G2042770
UPC #
-
Country of Origin
India

Dimensions

Width
6 1/2 in
Manufacturers Warranty Length
1 yr
Height
6 5/16 in
Max. Dia. Solids
0.25 Microns
Overall Height
6.31 in
Compatible Intake Pipe Size
3/4 in
Solid Diameter (Maximum)
0.25 micron
Manufacturer Warranty Length
1 yr
Compatible Discharge Pipe Size
3/4 in
Overall Width
6.5 in
Discharge Diameter
3/4 in
Inlet Diameter
3/4 in
Motor Frame Size
56J

Details

HP
1/2 hp
Voltage
115/230
Wetted Materials
Bronze, Buna-N, Carbon, Ceramic and 304 Stainless Steel
Seal Material
304 Stainless Steel (Spring), Buna-N/Carbon/Ceramic (Face)
Max. Pressure
120 psi
Max. Case Pressure
200 psi
Max. Liquid Temp.
230 Degrees F
Motor RPM
3,450 RPM
Bearing Type
Ball
Agency Compliance
UL Listed
Pump RPM
3,450
Inlet Pressure
150 psi
Motor Enclosure
Open Drip Proof
Impeller Type
Regenerative Turbine
Phase
Single
Impeller Material
Bronze
Max. Specific Gravity
1
GPM @ 80 PSI
2.3
Overload Protection
yes
Inlet
3/4 in NPT
Motor Ambient Temp. Rating
40 Degrees C
Thermal Protection
yes
Motor Type
Capacitor-Start/Run
Outlet
3/4 in NPT
GPM @ 50 PSI
3.7
GPM @ 10 PSI
6.0
Best Efficiency GPM @ Head
2.0 @ 85 psi
GPM @ 40 PSI
4.2
Hz
60
Duty
Continuous
GPM @ 60 PSI
3.3
Installation Position
Horizontal
GPM @ 20 PSI
5.2
Housing Material
Bronze
GPM @ 30 PSI
4.7
GPM @ 75 PSI
2.7
Best Efficiency GPM @ PSI
2.0 @ 85
Inlet (In.)
3/4 NPT
GPM @ 100 PSI
1.1
Frame
56J
Item
Turbine Pump
Port Rotation
90 Degrees Increments
Amps
8.4/4.8
GPM @ 90 PSI
1.6
Pump Housing Material
Bronze
Nameplate Voltage
115/230V AC
Flow Rate @ 30 psi
4.7 gpm
Mounting Orientation
Horizontal
Flow Rate @ 15 psi
5.6 gpm
Case Pressure (Maximum)
200 psi
Wetted Material
304 Stainless Steel, Bronze, Buna-N, Carbon, Ceramic
Maximum Media Temperature
230 Degrees F
Features
Seals and an Easily Accessible Drain Plug, Spray Equipment
Flow Rate @ 50 psi
3.7 gpm
Frequency
60 Hz
Motor Ambient Temperature (Maximum)
104 Degrees F
Duty Cycle
Continuous
Flow Rate @ 100 psi
1.1 gpm
Flow Rate @ 80 psi
2.3 gpm
Flow Rate @ 20 psi
5.2 gpm
Discharge Type
NPT
Compatible with Media Type
Non-Flammable Liquids, Water
Flow Rate @ 40 psi
4.2 gpm
Minimum Flow Rate
1.1 gpm
Thermal Overload Protection
Yes
Maximum Flow Rate
6 gpm
Impeller Design
Peripheral Vaned
Standards
UL Recognized Motor
Shut Off Pressure (Maximum)
120 psi
Flow Rate @ 90 psi
1.6 gpm
Seal Type
Mechanical
NPSHr
150 psi
Specific Gravity (Maximum)
1
Flow Rate @ 60 psi
3.3 gpm
Flow Rate @ 70 psi
2.8 gpm
Flow Rate @ 10 psi
6 gpm
Motor Frame Designation
56J
Best Efficiency Head
85 ft
Horsepower
1/2 hp
Maximum RPM
3,450 RPM
Intake Type
NPT
Shaft Seal Type
Mechanical
Pumping Application
Boiler Feed, Condensate Return, Liquid Transfer, Booster Service, Reverse Osmosis and Water Treatment
Shaft Seal Material
304 Stainless Steel/Buna-N/Carbon/Ceramic
Media Temperature - Minimum
-20 Degrees F
Ambient Temperature - Maximum
104 Degrees F
Number of Stages
1
Flow Rate (Maximum)
6 gpm
Media Temperature - Maximum
230 Degrees F
Shut Off Pressure - Maximum
120 psi
Motor Design
Capacitor-Start/Run
Pump Design
Regenerative Turbine
Operation
Manual
Full Load Current
8.4/4.8
Power Source
Electric Motor
Best Efficiency Flow
3.3 gpm
Electrical Connection Type
Hardwired
Case Pressure - Maximum
200 psi
Flow Rate (Minimum)
1.1 gpm
Priming
Self-Priming
Feet of Head (Maximum)
100 ft
Chemical Compatibility
Non-Flammable Liquids, Water
Power Source - TS Only
Electric Motor

Description

Turbine Pump, Phase Single, Pump Housing Material Bronze, Motor Enclosure Open Dripproof, Horsepower 1/2 hp, Nameplate Voltage 115/230V AC, Shut Off Pressure (Maximum) 120 psi, Maximum Flow Rate 6 gpm, Flow Rate @ 10 psi 6 gpm, Flow Rate @ 20 psi 5.2 gpm, Flow Rate @ 30 psi 4.7 gpm, Compatible Intake Pipe Size 3/4 in, Compatible Discharge Pipe Size 3/4 in, Discharge Type NPT, Motor Type Capacitor-Start/Run, Best Efficiency Head 85 ft, Case Pressure (Maximum) 200 psi

Restrictions

WARNING: Cancer and Reproductive Harm For more information go to www.P65Warnings.ca.gov

Ratings & reviews

3 reasons you can count on us

  • Supplies for every job.

    10 million items and the exact one you need.

  • When you need it fast, count on Zoro!

    2 million products ship in 1 day.

  • Stretch your budget further.

    Everyday low prices on the brands you love.

Explore more products