- MFR #
- DB10P-B-M218
- Zoro #
- G423355272
- UPC #
- -
- Country of Origin
- United States
- Discharge Rotation Increments
- 0 Degrees
- Gasket Material
- FKM
- Flow Rate (Maximum)
- 94 gpm
- Motor Enclosure
- Totally Enclosed Fan Cooled
- Pump Design
- End Suction
- NPSHr
- 8 ft
- Media Temperature - Maximum
- 180 Degrees F
- Full Load Current
- 10.1/5.64-5.06A
- Drive Coupling Type
- Magnetic Coupling
- Chemical Compatibility
Acetic Acid 80%,Ammonium Hydroxide,Antifreeze,Calcium Chloride,Acetic Acid 20%,Citric Acid 50%,Deionized Water,Ethylene Glycol,Fertilizer,Water,Fungicide,Herbicide,Hydrochloric/Muriatic Acid 100%,Hydrochloric/Muriatic Acid 20%,Hydrochloric/Muriatic Acid 37%,Phosphoric Acid 50%,Potassium Hydroxide 50%,Saltwater,Sodium Bicarbonate 10%,Sodium Bisulfate,Sodium Bisulfite,Sodium Hydroxide/Caustic Soda 20%,Sodium Hydroxide/Caustic Soda 50%,Sodium Hydroxide/Caustic Soda 80%,Sulfuric Acid 10% to 70%,Sulfuric Acid 1% to 10%
- Impeller Material
- Polypropylene
- Shut Off Pressure - Maximum
- 21.6 psi
- Hazardous Location Class
- Not Rated
- Housing Material
- Polypropylene
- Media Temperature - Minimum
- 35 Degrees F
- Frequency
- 50/60 Hz
- Ambient Temperature - Minimum
- 32 Degrees F
- Shaft Seal Type
- Sealless
- Number of Stages
- 1
- Phase
- Single
- Pump Mounting Style
- Base-Mounted, Foot-Mounted
- Motor Speed (Maximum)
- 3,450 RPM
- Best Efficiency Head
- 44 ft
- Nameplate Voltage
- 115/208-230V AC
- Motor Design
- Capacitor-Start/Run
- Mounting Orientation
- Horizontal
- Feet of Head (Maximum)
- 50 ft
- Pumping Application
- Chemical Transfer, Liquid Transfer
- Viscosity (Maximum)
- 150 cps
- Specific Gravity (Maximum)
- 1.8
- Horsepower (Maximum)
- 1 hp
- Item
- Magnetic Drive Pump
- Ambient Temperature - Maximum
- 180 Degrees F
- Best Efficiency Flow
- 60 gpm
- Priming
- Manual
- Case Pressure - Maximum
- 80 psi
- Pump Drive Configuration
- Close-Coupled
Create Account