- MFR #
- 125MS1F4H4
- Zoro #
- G604177105
- UPC #
- 192998089294
- Country of Origin
- United States
- Discharge Pump Type
- Centrifugal Pump
- HP - Pumps
- 1 1/2 hp
- Phase - Pumps
- 1
- Voltage - Pumps
- 115/203V AC
- Max. Pressure - Pumps
- 125 psi
- Housing Material - Pumps
- Stainless Steel
- Motor Enclosure - Pumps
- Totally Enclosed Fan-Cooled
- Best Efficiency Range GPM @ Head
- 48 to 82.3 gpm @ 64 to 46.4 ft
- GPM of Water @ 60 Ft. of Head
- 59.4 gpm
- Max. Head
- 68 ft
- Motor RPM
- 3,500 RPM
- Frame
- 56YZ
- Impeller Type
- Enclosed
- Item
- Centrifugal Pump
- Agency Compliance
- NSF 61
- GPM of Water @ 40 Ft. of Head
- 91.1 gpm
- Phase
- Single
- Inlet Pressure
- 2 psi
- Hz
- 60 Hz
- Max. Liquid Temp.
- 212 Degrees F
- Duty
- Continuous
- Motor Type
- 1 - Phase; Totally Enclosed Fan-Cooled
- Seal Material
- Stainless Steel, Buna Elastomer, Carbon, Ceramic
- GPM of Water @ 50 Ft. of Head
- 77.2 gpm
- Amps
- 10.0-9.9
- Includes
- Manual
- Max. Specific Gravity
- 1
- Wetted Materials
- 316 Stainless Steel, AISI 316L Stainless Steel, Carbon, Silicon Carbide, Viton
- Max. Case Pressure
- 125 psi
- Motor Enclosure
- Totally Enclosed Fan Cooled
- Installation Position
- Horizontal
- Port Rotation
- Top
- Best Efficiency GPM @ PSI
- 68.6 gpm @ 55 ft
- Impeller Material
- Stainless Steel
- Duty Cycle
- Continuous
- Motor Frame Designation
- 56YZ
- Compatible with Media Type
- Water
- Wetted Material
- Stainless Steel, Buna Elastomers, Carbon, Ceramic Stationary
- Seal Type
- Mechanical
- Shaft Material
- Stainless Steel
- Maximum Feet of Head
- 68 ft
- Best Efficiency Flow
- 68.6 gpm
- Intake Type
- NPT
- Minimum Flow Rate
- 59.4 gpm
- Discharge Type
- NPT
- Horsepower
- 1 1/2 hp
- Impeller Design
- Closed
- Specific Gravity (Maximum)
- 1
- Priming
- Manual
- Frequency
- 60 Hz
- Mounting Orientation
- Horizontal
- Best Efficiency Head
- 55 ft
- Maximum Media Temperature
- 212 Degrees F
- Shut Off Pressure (Maximum)
- 75 psi
- Pump Housing Material
- Stainless Steel
- Flow Rate @ 50 ft of Head (Maximum)
- 78 gpm
- Flow Rate @ 60 ft of Head (Maximum)
- 60 gpm
- Series
- MCS
- Standards
- CSA Certified, NSF 61 Certified
- Features
- Easy Accessible Vent, High Efficiency Impeller, Prime and Drain Connections
- Maximum RPM
- 3,500 RPM
- Pumping Application
- Booster Services
- For Use With Potable Systems
- Yes
- Maximum Flow Rate
- 91.1 gpm
- Nameplate Voltage
- 115/230V AC
- Flow Rate @ 40 ft of Head (Maximum)
- 92 gpm
- Pump Design
- End Suction
- Media Temperature - Maximum
- 212 Degrees F
- Discharge Rotation Increments
- 0 Degrees
- Shut Off Pressure - Maximum
- 75 psi
- Drive Coupling Type
- No Coupling
- Media Temperature - Minimum
- -10 Degrees F
- Inlet Position
- Center
- Hazardous Location Class
- Not Rated
- Thermal Overload Protection
- No
- Motor Speed - Maximum
- 3,500 RPM
- Discharge Orientation
- Top
- Volute Material
- Cast Iron
- Inlet Orientation
- Top
- Discharge Position
- Center
- Case Pressure - Maximum
- 125 psi
- Shaft Seal Type
- Mechanical
- Flow Rate (Minimum)
- 59.4 gpm
- Feet of Head (Maximum)
- 68 ft
- Flow Rate (Maximum)
- 91.1 gpm
- Chemical Compatibility
- Water
- Number of Stages
- 1
- Shaft Seal Material
- 18-8 Stainless Steel, Buna-N Elastomer, Carbon Rotary, Ceramic Stationary
Create Account