2,000+ Results for Media Converters & Data Adapter Kits - Page 6
Key Features:
- Standards: Telcordia (Bellcore), GB
- IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Key Features:
- EMI: FCC Part 15, CISPR (EN55022) class A,
- Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T; IEEE 802.3z for 1000Base-X
- MAC Table: 2048 MAC addresses
Key Features:
- Standards: MIL-HDBK-217F
- Overload Current Protection: Supported
- Power Substation: IEC 61850-3
Key Features:
- Operating Altitude: Up to 3,048 meters (10,000 feet)
- Power / TST: This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink when in Loopback test mode.
- Universal AC/DC adapter: 100-240v AC, regulated DC adapter included
Key Features:
- Standards: MIL-HDBK-217F
- EMI: CISPR 32, FCC Part 15B Class A
- IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Auto-Negotiation (802.3u): Enabled (Default)- The media converter uses 802.3u Auto-negotiation on the 10/100/1000Base-T interface. It is set to advertise full duplex, half duplex, pause and remote fault capabilities; Disabled- The media converter sets the port according to the position of the speed and duplex switches.
- Laser Safety: EN 60825-1:2007
Key Features:
- Size: Maximum frame size of 10,240 bytes -- Gigabit; Maximum frame size of 2048 bytes -- Fast Ethernet
- Storage Humidity: 5% to 95% non-condensing
- Copper Duplex (FDC): This green LED is operational only when power is applied. The LED is on when the 10/100/1000Base-T link is operatinal in full duplex mode. The LED is off when in half duplex.
Key Features:
- Standards: IEEE 802.3 for 10BaseT; IEEE 802.3u for 100BaseT(X) and 100BaseFX; IEEE 802.3ab for 1000BaseT(X); IEEE 802.3z for 1000BaseSX/LSX/LX/LH/LHX/ZX/E2X
- Housing: Metal, IP30 protection
- Vibration: IEC 60068-2-6
Key Features:
- Standards: MIL-HDBK-217F
- 100BaseFX Ports (single-mode SC connector): IMC-21-S-SC: 1
- Overload Current Protection: Supported
Key Features:
- Size: Maximum frame size of 10,240 bytes
- Product Type: Transceiver/Media Converter
- Fiber Optic Wavelength: 1310 nm
Key Features:
- Standards: MIL-HDBK-217F
- Storage Temperature (package included): -40 to 75°C (-40 to 167°F)
- IP Rating: IP30
Key Features:
- EMI: EN 55022 Class A, FCC Part 15 Subpart B Class A
- Storage temperature: -20 to 75°C (-4 to 167°F)
- EMS: EN 61000-4-2 (ESD) Level 3; EN 61000-4-3 (RS) Level 2; EN 61000-4-4 (EFT) Level 2; EN 61000-4-5 (Surge) Level 2; EN 61000-4-6 (CS) Level 2; EN 61000-4-8 (PFMF) Level 3; EN 61000-4-11 (DIPS)
Key Features:
- Dimensions (W x D x H): 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
- Redundant Input Power: Dual 12~48 VDC power input at 4-pin terminal block
- EMI: FCC Part 15, CISPR (EN55022) class A,
Key Features:
- Vibration: IEC60068-2-6 , EN61373
- Redundant Input Power: Dual 12 ~ 48VDC power inputs at 4-pin terminal block
- Reverse Polarity Protection: Present
Key Features:
- EMI: FCC Part 15, CISPR (EN55022) class A,
- Processing: Store-and-Forward
- 1000Base-X Port Indicator: Green for port Link/Act
Key Features:
- 100Base-FX fiber port indicator: Green for port Link/Act. Amber for Duplex/Collision
- Redundant Input Power: Dual 12~48 VDC power input at 4-pin terminal block
- EMI: FCC Part 15, CISPR (EN55022) class A,
Key Features:
- Operating Humidity: 10 ~ 95% (non-condensing)
- Single-mode (EKI-2741LX/LXI): Wavelength: 1310 nm; Tx Power: -3/-9.5 dBm ; Rx Sensitivity: -20 dBm ; Parameters: 9/125 um
- LED Indicators: P1, P2, P-Fail ; Fiber: LNK/ACT ; Ethernet: 1000M, LNK/ACT
Key Features:
- Input power: Dual 50~57 VDC voltage power inputs at 4-pin terminal block
- Shock: IEC60068-2-27
- 10/100Base-T(X) RJ45 port indicator: Green for port Link/Act - (ON) Link up / (Blinking) Acting / (OFF) ; Link down; Amber for 100Mbps/10Mbps indicator - (ON) Working at 100Mbps / (OFF) ; Working at 10Mbps; Green for port duplex indicator - (ON) Full-Duplex / (OFF) Half-Duplex
About Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are used to convert data signals between different types of media, such as coaxial cables, twisted pair cables, and fiber optic cables. These kits allow for the transmission of data over long distances while maintaining the integrity of the signal.
Types of Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits come in a variety of forms and configurations depending on the type of media being converted. Different kits may have different components that support various protocols or have different power requirements. Some kits also provide additional features such as signal amplification or frequency conversion.
How Media Converters & Data Adapter Kits are Made
Media Converters & Data Adapter Kits are typically constructed with components like transceivers, connectors, power supplies, and circuit boards. They are designed to be compatible with multiple communication protocols and can often be customized for specific applications.
Industries that use Media Converters & Data Adapter Kits
Media Converters & Data Adapter Kits are commonly used in a variety of industries including telecommunications, aerospace engineering, automotive manufacturing, and medical device production. Professionals in these fields rely on these kits to enable efficient data transmission across long distances.
Find the Media Converters & Data Adapter Kits You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of electrical supplies, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time. Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.