Solenoid Valve, 2-Way, 2-Position, Normally Closed, 1-1/2 in Pipe Size, 120VAC, Inline Pilot, PVC

The PLAST-O-MATIC PS150EPW11-120/60-PV is a solenoid valve featuring an inline pilot design with a diaphragm valve construction. It operates in a normally closed configuration with 2-way flow and 2-position actuation. Manufactured with a PVC body and EPDM seals, this valve is compatible with liquids within the chemical compatibility range for PVC body and EPDM seals; refer to chemical compatibility guidelines. Operates within the specified differential pressure range (5 psi to 70 psi) and maximum fluid temperature (140°F). It can be mounted horizontally or vertically. The valve includes the coil necessary for operation and is rated for indoor and outdoor environments, supporting electrical operation at 120 VAC and 60 Hz frequency.*

Key Features:

• Body Material: PVC construction
• Seal Material: EPDM
• Valve Type: Inline Pilot, Diaphragm
• Valve Configuration: 2-Way, 2-Position, Normally Closed
• Orifice Diameter: 1-15/16 in
• Nominal Pipe Size: 1-1/2 in with NPT inlet and outlet connections
• Operating Pressure Differential: Minimum 5 psi; Maximum 70 psi (Water)
• Maximum Fluid Temperature: 140°F
• Maximum Ambient Temperature: 104°F
• Coil Power: 11 W at 120 VAC, 60 Hz frequency
• Coil Enclosure: Watertight, Dust Tight
• Electrical Connection: 1/2 in Conduit
• Mounting Orientation: Horizontal or Vertical
• Environmental Rating: Indoor, Outdoor
• Overall Dimensions: 6 in length, 6 in width, 9-17/32 in height
• NEMA Enclosure Rating: 4X
• Includes: coil and seal
• Application: Compatible with liquids within the chemical compatibility range for PVC and EPDM materials; see compatibility chart.
• Standards: CSA certified