Item
Power Inverter and Battery Charger
Peak Output Power
4,800 W
Continuous Output Power
2,400 W
Inverter Output Form
Modified Sine Wave
Inverter Input Voltage
24V DC; 120V AC
Inverter Output Voltage
120V AC
DC Connection
Bolt Down Terminals
Case Material
Polycarbonate
Charger Output Voltage
24V DC
Application
Powering Tools; Saws; Motors; Pumps; Portable Lighting; Appliances and Computer Equipment in Heavy-Load Conditions
Max. Input Current
Full continuous load - 112 A at 24V DC; AC INPUT: 44 A at 120V AC with full inverter and charger load
Automatic/Manual
Automatic
Nominal Output Power
2,400 W
Charger Input Voltage
120V AC
Features
Automatic Transfer Switching, Automatic Voltage Regulation, Meets Normal and Peak Power Demands, Reliable Power for Mobile, Emergency and Remote Sites, Remote Control Capability, Rugged Polycarbonate Housing
Inveter Output Voltage
120V
Charger Output Current
55 A
Charger Input Current
24 A
Product Name
PowerVerter APS APS2424 DC-to-AC Inverter
Package Contents
PowerVerter APS APS2424 DC-to-AC Inverter, Instruction Manual with Warranty Information
Battery Charge
14A / 55A (selectable)
Relative Humidity
0%-95% Non-Condensing
Output Receptacles
Hardwire
Recommended Electrical Service
DC INPUT: Requires 24VDC input source capable of delivering 112A for the required duration (when used at full continuous capacity - DC requirements increase during Over-Power and Double-Boost operation).
Overload Protection
Includes 30A input breaker dedicated to the charging system and 20A output breaker for AC output loads
AC Suppression Joule Rating
600
Maximum Input Amps / Watts
DC INPUT: Full continuous load - 112A at 24VDC. AC INPUT: 44 amps at 120VAC with full inverter and charger load (24A max charger-only / combined input load to support charger and AC output is automatically controllable to 66%-33%-0% based on AC output load
DC System Voltage (VDC)
24
Nominal Output Voltage(s) Supported
120V
Transfer Time (Line Power to Battery Mode)
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time compatibility of loads for UPS applications)
Nominal Input Voltage(s) Supported
120V AC
Battery Pack Accessory (Optional)
98-121 sealed lead acid battery (optional)
Voltage Compatibility (VDC)
24
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any level, up to 150 watts.
Output Frequency Regulation
60 Hz (+/- 0.3 Hz)
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode. In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC power to connected loads.
Package Includes
APS2424 2400W PowerVerter APS 24V DC 120V AC Inverter/Charger;Owner's manual
Frequency Compatibility
60 Hz
Output Voltage Regulation
LINE POWER (AC): Maintains 120V nominal sine wave output from line power source. INVERTER POWER (AC): Maintains PWM sine wave output voltage of 120 V AC (+/-5%).
Front Panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7 levels reported). See manual for sequences.
High Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to 145 - see manual)
Form Factors Supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information)
Voltage Compatibility (VAC)
120
Material of Construction
Polycarbonate
Low Voltage Transfer to Battery Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95, 105V - see manual)
