634 Results for Cutting, Tapping, and Grinding Fluids - Page 5
Key Features:
- Item: Icecut Cutting Fluid,20L
Key Features:
- Container Size: 5 gal
- Cutting Fluid Sub-Category: Specialty Fluids
- Color: Brown, Red
Key Features:
- Item: Alucut Cutting Lubricant,300g
Key Features:
- Item: Floor and Multi-Purpose Cleaner
- Form: Liquid
- Physical Form: Liquid
Key Features:
- Container Size: 1 gal
- Application: Grinding, Drilling, Tapping And Reaming On Cast Iron, Steels, Copper Alloys, Plastics, And Composites Not Recommended Magnesium Or Zirconium
- Base Oil: Semi-Synthetic
Key Features:
- Features: Rust Inhibitor for Corrosion Protection
- Color: Green
- Fluid Type: Metal Cutting Fluid
Key Features:
- Item: SemiSynthetic Cutting Fluid,5 gal.,Pail
Key Features:
- Item: Full Synthetic Cutting Fluid,5 gal.,Pail
Key Features:
- Series: Bio-SynXtra ISO 46
- Fluid Properties: Biodegradable, Chlorine Free, Phosphorus Free, Silicone Free, Sulfur Free, Zinc Free
- Standards: Biobased, Biodegradable, EVA-VGP-EAL Compliant
Key Features:
- Item: Full Synthetic Cutting Fluid,5 gal.,Pail
Key Features:
- For Nominal Pipe Size: 2 in
- Number of Pieces in Set: 4
- Nominal Conduit/Pipe: 2"-11-1/2 TPI
Key Features:
- Item: Cutting Oil,Clear Thread
Key Features:
- Container Size: 5 gal
- Physical Form: Liquid
- Flash Point: 140 Degrees C
Key Features:
- Item: General Purpose Cutting Oil
Key Features:
- Color: Brown
- Container Type: Pail
- Size: 5 gal.
Key Features:
- Physical Form: Liquid
- Flash Point: 364 Degrees F
- For Use With: Ferrous, Non-Ferrous Metals
Key Features:
- Container Size: 5 gal
- Physical Form: Liquid
- Cutting Fluid Sub-Category: Coolants
Key Features:
- Viscosity Index: 234
- For Use With: Ferrous and Non-Ferrous Metal Alloys
- Container Size: 5 gal
Key Features:
- Item: Slik-Tap Direct Tap Lubricant
Key Features:
- Container Size: 5 gal
- Features: Environmentally Friendly, Minimum Quantities Of Material At The Point Of Cut For High Material Removal Rates, Promotes Superior Finish And Tool Life And Is Compatible With All Materials, Renewable Resource Based, Very High Levels Of Lubricity With Even
- Fragrance: Mild Odor
Key Features:
- For Use With: All Metals
- Physical Form: Liquid
- Item: Machining Fluid Additive
Key Features:
- Container Style: Pail
- Color: Yellow
- Flash Point: 182 Degrees C
Key Features:
- Container Style: Drum
- Container Type: Drum
- Features: Residual Dry-Film Corrosion Protection
Key Features:
- Fluid Properties: Chlorine Free, Copper Free, Low Foam, Nitrite Free, Phenol Free, Silicone Free, Triazine Free
- Container Size: 54 gal
- Fragrance: Mild Odor
Key Features:
- Fluid Type: SC536
- Features: Corrosion Inhibition, Exceptional Sump Life And Very Good Tramp Oil Rejection, Extremely Low Carry Off For Very Low Total Operating Costs, Low Foam And Low Mist, Minimizes The Buildup Of Sticky Residues
- pH Value: 9.4 to 9.8 (Operating), 9.5 to 10.5 (Concentrate)
About Cutting, Tapping, and Grinding Fluids
Cutting, tapping, and grinding fluids are used in a variety of industries to help reduce friction, heat buildup, and wear on metalworking tools. These fluids can be used to lubricate cutting tools and surfaces while also providing cooling properties that can help prevent the formation of chips or burrs during machining operations.
Types of Cutting, Tapping, and Grinding Fluids
Cutting fluids come in a range of types including water-soluble oils, straight oils, semi-synthetic products, synthetic products, and misting systems. Each type of fluid has its own unique characteristics that make it suitable for specific applications such as tapping or grinding. For example, water-soluble oils provide better cooling than straight oils but may not offer the same protection against corrosion.
How Cutting, Tapping, and Grinding Fluids are Made
Cutting fluids are typically made up of a base oil combined with emulsifiers or surfactants to create an emulsion. Additives such as corrosion inhibitors or extreme pressure additives may also be added to enhance performance. The ingredients are blended together using specialized equipment before being tested for quality assurance.
Industries that use Cutting, Tapping, and Grinding Fluids
Cutting fluids are commonly used in manufacturing industries such as automotive production lines where they are applied directly onto parts prior to machining operations. They can also be used in welding processes where they provide lubrication between two surfaces being joined together by heat. In addition to this they can also be used for general purpose lubrication when drilling holes into metals.
Find the Cutting, Tapping, And Grinding Fluids You Need at Zoro
Looking for a specific item? Use our robust search tool to find it by name or keyword, or use our handy filters to narrow down our full assortment. You can also check out our whole selection of cutting, tapping, and grinding fluids, along with other tools or equipment to ensure you have all you need to tackle the job, especially if you're taking on a DIY project for the first time.
Plus, when you shop at Zoro, you'll always enjoy competitive prices on tons of great brands you know and trust. We make the shopping experience as fast and seamless as possible with free shipping on orders over $50 for registered users, Net 30 payment terms for qualifying customers, and an unparalleled customer service experience.