12V Dc Electric Motor

DC Gearmotor, Gearmotor Voltage 12V DC, Max. Torque 102.0 in-lb, Single Gearmotor Shaft Type, Nameplate RPM 94 RPM, Totally Enclosed Nonventilated Gearmotor Enclosure, All Angle Gearmotor Mounting Position, Overhung Load 150 lb, Input HP 1/6, Gear Ratio 19:1, Full Load Amps 14.5 A, None Thermal Protection, Motor Type Permanent Magnet DC, Replacement Brushes 6YHY5

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1 HP, Nameplate RPM 1, 800, Voltage 12V DC, 80.0 A Full Load Amps, 56C Frame, Full Load Torque 35 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class H, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 3/4 HP, Nameplate RPM 1, 800, Voltage 12V DC, 58.0 A Full Load Amps, 56C Frame, Full Load Torque 26.3 in-lb, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in, Brush Type External, Overall Length 13 5/16 in

The Dayton 6K778 Split-Phase Belt Drive Motor is the perfect solution for belt drive fans and blowers. This split-phase motor has a 1/2 in. shaft diameter, which makes it compatible with most fan/blower applications. The open dripproof motor enclosure design protects against water, oil, dirt and other contaminants. With a 115V AC voltage, this belt drive motor is ideal for use in factories or warehouses where heavy duty equipment is used. It features one speed with a 1, 701 to 1, 800 RPM range. If you are looking for an efficient belt drive fan or blower motor that will not let you down during your next project, then look no further than the Dayton 6K778 Split Phase Belt Drive Motor.

Farm Duty Motor, Single Phase, Motor Design Capacitor-Start, 1 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 14.0/7.1-7.0, 56 Frame, Usable @ 208V Yes, Usable @ 200V No, 60 Hz, Motor Service Factor 1.15, Motor Thermal Protection Manual, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal

Standard V-Belt Pulley, For V-Belt Section 3L, 4L, A, Number of Grooves 1, Pulley Outside Dia. 2.0 in, Pulley Bore Type Fixed Bore, Pulley Bore Dia. 1/2 in, Pulley Material Die Cast Zamak 3, None Bushing Required, Fits Shaft Dia. 1/2 in, 3L Belt Pitch Dia. 1.55 in, 4L or A Belt Pitch Dia. 1.85 in, Construction Solid, Industry Number CA0200X050, Keyway Size Type No Keyway, Set Screw Included Yes

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/2 HP, Nameplate RPM 1, 750, Voltage 90V DC, 5.0 A Full Load Amps, 56C Frame, Full Load Torque 18 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in

If you're looking for a high-quality table saw motor, the Leeson 120728.00 is your solution. This 3 HP motor will ensure that your power tools continue to run smoothly and efficiently. The Leeson 120728.00 Table Saw Motor has a 3/4 in. diameter shaft and runs at 3450 RPMs. It has a totally enclosed fan cooled enclosure, making it ideal for outdoor applications as well as indoors. Designed with a capacitor start design, this table saw motor comes complete with a nameplate speed of 3, 450 RPMs and a horsepower rating of 3 HPs. The voltage required is 230V AC and the full load amps are 13 amps. When it comes to finding the right power tool motors, the Leeson 120728.00 is what you need to make sure your equipment continues running smoothly.

Table Saw Motor, Single Phase, Motor Design Capacitor-Start, 2 HP, Nameplate RPM 3, 450, No. of Speeds 1, 115/230V AC Voltage, Full Load Amps 22.0/11.0, 143Y Frame, Usable @ 208V No, Usable @ 200V No, 60 Hz, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CCW, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal, Motor Frame Material Steel

Farm Duty Motor, Single Phase, Motor Design Capacitor-Start, 1/2 HP, Nameplate RPM 1, 725, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 8.8/4.4, 56 Frame, Usable @ 208V Yes, Usable @ 200V No, 60 Hz, Motor Service Factor 1.15, Motor Thermal Protection Manual, Ins. Class B, Max. Ambient Temp. 40 Degrees C, Duty Cycle Continuous, Motor Shaft Rotation CW/CCW, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal

DC Permanent Magnet Motor, Motor Design Permanent Magnet DC, 1/2 HP, Nameplate RPM 1, 750, Voltage 180V DC, 2.5 A Full Load Amps, 56C Frame, Full Load Torque 18 in-lb, Motor Service Factor 1, Motor Thermal Protection None, Ins. Class F, Max. Ambient Temp. 40 Degrees C, Motor Shaft Rotation CW/CCW, Duty Cycle Continuous, Motor Enclosure Design Totally Enclosed Fan-Cooled, Motor Mounting Type Face, Base, Removable Base Yes, Shaft Dia. 5/8 in, Motor Bearings Ball, Shaft Length 1 7/8 in