Dayton Electric Motors
Results for "Dayton Electric Motors" (1,000+ items)
Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto
HVAC Motor, Totally Enclosed Fan-Cooled, 1/8 HP, 3,000 Nameplate RPM, 1 Speed, 115V AC, 1.3 A
Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto
Capacitor-Start Belt Drive Motor, 1/3 HP, 115/230V AC Voltage, 48Z Frame, 1,725 Nameplate RPM
Capacitor-Start Belt Drive Motor, 3/4 HP, 56 Frame, 115/208-230V AC Voltage, 1,725 Nameplate RPM
Top reasons why customers love these products
Customer insights summarized by AI
Customer insights summarized by AI
Dimensional Compatibility
Technicians report effortless retrofitting due to exact physical alignments with existing commercial infrastructure.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“THE MOTOR WAS A PERFECT MATCH AND WAS DELIVERED IN DAYS OF MY CALL EXCELLENT!!!!”“Great motor fit like a glove”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1/4 HP, 1,725 Nameplate RPM, B“The motor was a direct replacement and bolted in the exact same place.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Perfect replacement for our Greenhouse Fan motor!”
Operational Smoothness
Industrial users observe minimal acoustic disturbance and stable rotational balance throughout active operating cycles.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“It is quiet and smooth running without any vibration. Very happy with this purchase and would highly recommend”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Very quiet operation. Purchased for a brake lathe, had to make an exchange due to internal failure. Zoro was very easy to deal with on this.”
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Have had it for only a month but it runs nice and quiet.”“Draws significantly less amps than the one I pulled, and operates much quieter.”
Rapid Dispatch
Facility operators experience minimal downtime thanks to dependable expedited logistics and handling.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Arrived very quickly and was exactly as advertised. Would definitely buy again or recommend to a friend.”“Used it to replace a bad motor on a seed cleaner. Worked great and was shipped fast.”“The motor shipped in less than 24 hours and arrived in less than 48!”
- HVAC Motor, 1/30 HP, 1550 rpm, 115V, 3.3“Product was just what was needed and added plus was that it was received the next day.”
Reliable Torque
Heavy-duty machinery benefits from substantial mechanical force capable of sustaining continuous workload requirements.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Great replacement for my older motor. Great price with lots of power.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1/4 HP, 1,725 Nameplate RPM, B“Using it for a small band saw works great plenty of power”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Another must have to get the tube axial fan to suck out the nasty fumes. No lack of power with this motor.”
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Customer service looked up said it was equivalent and it was . Very strong on blower .”
How professionals are using Dayton Electric Motors
Agricultural Machinery & Crop Processing
Deployed as reliable primary drive units on post-harvest seed preparation devices, crop processing equipment, and field conveyances.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Used it to replace a bad motor on a seed cleaner. Worked great and was shipped fast.”“My dad uses the motor in the electric corn creaming machine that he builds.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Put this on bale conveyor. Haven't gotten to use it yet, but it ran and seems like it will work fine.”
Commercial Ventilation & Exhaust Systems
Utilized across manufacturing plants and horticultural operations to power large-scale ventilation units and extract exhaust fumes.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“I bought this motor to replace a worn out one for a 48" box fan. Works great!”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Perfect replacement for our Greenhouse Fan motor!”“We have a fan in the warehouse that the motor went out on, we replaced it with this one and it works as expected.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Another must have to get the tube axial fan to suck out the nasty fumes.”
Workshop Tooling & Finishing Equipment
Integrated into fabrication benches and stationary shop tools to provide consistent rotational energy for material preparation and shaping.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Use this motor in the shop to polish metals and coins. Great replacement for my older motor.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1/4 HP, 1,725 Nameplate RPM, B“Using it for a small band saw works great plenty of power”
- HVAC Motor, Open Air-Over, 1/20 HP, 1,550 Nameplate RPM, 1 Speed, 115V AC, Stud Mount, CWSE“Bench mounted motor with 3" dia. stone attached to shaft for deburring small parts.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1 HP, 1,725 Nameplate RPM, Auto“Used as a replacement to my Craftsman 113 12140 motor. Instructions were clear, performs so much better.”
Industrial Pumping & Mixing Apparatus
Installed on custom fluid displacement systems, onsite pumping assemblies, and heavy aggregate mixing drums.
Dayton Electric Motors FAQs
Yes, alternating rotation is supported and simple to adjust according to documentation, as confirmed in 2 reviews detailing quick directional changes.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Had to reverse direction of motor — the instructions and procedure were easy.”
- Belt Drive Motor, 1 Speed, Open Dripproof, Cradle Base Mount, 1/4 HP, 1,725 Nameplate RPM, B“I like that you can change the rotation on the motor easily.”
Yes, multiple buyers note these units match older legacy bolt footprints and cross-reference obsolete models, cited across 3 reviews.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“I purchased this motor to replace one that stopped working in my 60+ year old whole house fan. Everything lined up perfectly”
- HVAC Motor, 1/50 HP, 1550 rpm, 115V, 3.3“Worked great and was the right size and excellent service and fast shipping to replace a 60 year old motor.”
- HVAC Motor, 1/30 HP, 1550 rpm, 115V, 3.3“This turned out to be a direct replacement (shaft was a bit longer) for an old unit who's number would not cross to anything.”
They sustain steady workloads while maintaining lower relative electrical consumption, though air-over cooling is recommended for specific continuous duties, as discussed in 2 reviews.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Draws significantly less amps than the one I pulled, and operates much quieter.”
- HVAC Motor, Open Air-Over, 1/20 HP, 1,550 Nameplate RPM, 1 Speed, 115V AC, Stud Mount, CWSE“The motor DOES GET HOT, therefore running it AOD (Air Over Duty) is a must. otherwise run it at low duty cycles”
Certain configurations feature sealed ball bearings requiring no maintenance, while models with lubrication ports need proper orientation during mounting, referenced across 3 reviews.
- Split-Phase Belt Drive Motor, 1/3 HP, 48 Frame, 115V AC Voltage, 1,725 Nameplate RPM“Fan works flawlessly with new motor — and no more oiling.”“I looked for days to find one of these motors with ball bearings. This is the only one for less than $90.”
- HVAC Motor, 1/30 HP, 1550 rpm, 115V, 3.3“This one has very tiny lubrication ports, so I believe periodic lubrication is required. Watch for these, so you can install the motor with the ports ON TOP”
What Professionals Say
From professionals who use Dayton Electric Motors
I ran the motor on the bench before installing it on a cement mixer. It is quiet and smooth running without any vibration.
Draws significantly less amps than the one I pulled, and operates much quieter. (I think I might've needed this). Installation was straight forward with good instructions, and included bracket seems strong.
We wholesale electric motors and this was a good buy.