1,000+ Results for Direct Drive Blower Motors - Page 4
Key Features:
- Motor Mounting Position: All Angle
- Resilient Ring Dia.: 2 1/4 in
- Standards: CSA Certified, UL Recognized
Key Features:
- Motor Shaft Design: Double-Flat
- Stud Size: #8-32
- Motor Application: HVAC/R
Key Features:
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Nameplate RPM: 1,075
- Stud Size: #8-32
Key Features:
- Overall Length: 9 in
- Duty: Continuous
- Shaft Dia.: 1/2 in
Key Features:
- Ins. Class: F
- Motor Shaft Rotation: CW/CCW
- Motor Application: HVAC/R
Key Features:
- Body Dia.: 5 9/16 in
- Shaft Dia.: 1/2 in
- No. of Speeds: 1
Key Features:
- Motor Service Factor: 1
- Hz: 60/50
- Full Load Amps: 3.0-3.1, 6.4-6.3
Key Features:
- Mounting Stud Location: Both Ends
- Motor Thermal Protection: Auto
- Ins. Class: B
Key Features:
- Frame: 56Z
- RPM Range: 1,001-1,100
- Voltage: 115V AC
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Voltage: 208-230V AC
- Motor Design: Permanent Split Capacitor
Key Features:
- Voltage: 115/230V AC
- Motor Sub Application: Direct Drive
- Motor Application: HVAC/R
Key Features:
- Motor Service Factor: 1
- Motor Application: Pump
- Overall Length: 7 11/16 in
Key Features:
- Length Less Shaft: 4 7/16 in
- Mounting Stud Pattern: 4-7/16" x 4-7/16"
- Bolt Circle Dia.: 4 7/16 in
Key Features:
- Shaft Dia.: 1/2 in
- Bolt Circle Dia.: 4 7/16 in
- Motor Service Factor: 1
Key Features:
- Capacitor Required: 2MDV4
- Duty: Continuous
- Shaft Dia.: 1/2 in
Key Features:
- Application: Air Compressor
- Motor Bearings: Ball
- RPM Range: 1,001-1,100
Key Features:
- Nominal Efficiency: 69.5 %
- Standards: CSA Certified (258501), UL Component Recognition (E37403)
- Motor Thermal Protection: Auto
Key Features:
- Motor Mounting Type: Stud
- Shaft Dia.: 5/8 in
- Application: Blowers, Fans and Air Circulators
Key Features:
- Motor Service Factor: 1
- Body Dia.: 5 5/8 in
- Item: Condenser Fan Motor
Key Features:
- Length Less Shaft: 8 3/4 in
- Body Dia.: 5 5/8 in
- Shaft Length: 5 11/16 in
Key Features:
- Body Dia.: 6 1/2 in
- Voltage: 115V AC
- Duty: Continuous
Key Features:
- Includes: 2-1/2 in Ring Conversion Kit
- Phase: Single
- Standards: CSA Certified (258501), UL Recognized (E37403)
Key Features:
- Motor Application: HVAC/R
- Length Less Shaft: 4 1/2 in
- Phase: Single
Key Features:
- Motor Mounting Position: All Angle
- Motor Thermal Protection: Auto
- Item: Direct Drive Blower Motor
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Phase: Single
- RPM Range: 1,601-1,700
Key Features:
- Motor Thermal Protection: Auto
- Standards: CSA Certified (258501), UL Recognized (E37403)
- Shaft Length: 6 in
Key Features:
- Item: Direct Drive Blower Motor
- Motor Enclosure Design: Open Air-Over
- Motor Thermal Protection: Auto
Key Features:
- Ring to Ring Center: 4 9/16 in
- Application: Blowers, Fans and Air Circulators
- Bolt Circle Dia.: 4 7/16 in
Key Features:
- Motor Application: HVAC/R
- Hz: 60/50 Hz
- Item: Belt Drive Motor
Key Features:
- Shaft Length: 5 in
- Motor Bearings: Ball
- Nameplate RPM: 1,075 rpm
Key Features:
- Motor Shaft Rotation: CW/CCW
- Overall Length: 10 in
- HP: 1/2
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- HP: 1/2
- Motor Shaft Rotation: CW/CCW
Key Features:
- Ins. Class: B
- Duty: Continuous
- Length Less Shaft: 8 13/16 in
Key Features:
- Item: Direct Drive Blower Motor
- Frame: 48Y
- Capacitor Required: Included