109 Results for Direct Drive Blower Motors by CENTURY
CENTURY
Key Features:
- Motor Mounting Type: Ring
- Standards: CSA Certified, UL Recognized
- Motor Thermal Protection: Auto
Key Features:
- Frame: 48
- Motor Shaft Rotation: CW/CCW
- Ins. Class: B
Key Features:
- Shaft Dia.: 1/2 in
- Motor Sub Application: Direct Drive Fan/Blower
- Body Dia.: 5 in
Key Features:
- Stud Size: #8-32
- Motor Mounting Position: Horizontal
- Shaft Dia.: 1/2 in
Key Features:
- Motor Thermal Protection: Auto
- RPM Range: 1,001-1,100
- Motor Application: HVAC/R
Key Features:
- Item: Direct Drive Blower Motor
- Stud Size: #8-32
- Motor Bearings: Sleeve
Key Features:
- Shaft Length: 4 1/2 in
- RPM Range: 1,501-1,600
- Resilient Ring Dia.: 2 1/4 in
Key Features:
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Nameplate RPM: 1,075
- Stud Size: #8-32
Key Features:
- No. of Speeds: 1
- Motor Service Factor: 1
- Motor Shaft Rotation: CCWLE
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Voltage: 208-230V AC
- Motor Design: Permanent Split Capacitor
Key Features:
- Length Less Shaft: 4 7/16 in
- Mounting Stud Pattern: 4-7/16" x 4-7/16"
- Bolt Circle Dia.: 4 7/16 in
Key Features:
- Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
- Motor Service Factor: 1
- Shaft Length: 6 7/16 in
Key Features:
- Motor Shaft Rotation: CW/CCW
- Motor Mounting Type: Ring
- Mounting Stud Pattern: 3-1/8 in x 3-1/8 in
Key Features:
- Motor Service Factor: 1
- Motor Sub Application: Direct Drive Fan/Blower
- Manufacturers Warranty Length: 1 yr
Key Features:
- No. of Speeds: 3
- Duty: Continuous
- Resilient Ring Dia.: 2 1/4 in
Key Features:
- Mounting Stud Location: Both Ends
- Motor Thermal Protection: Auto
- Ins. Class: B
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Duty: Continuous
- Length Less Shaft: 4 15/16 in
Key Features:
- Shaft Length: 1 1/2 in
- Ring to Ring Center: 7 1/2 in
- Standards: CSA Certified, UL Recognized
Key Features:
- Includes: Extended Studs, Resilient Rings
- Nameplate RPM: 1,050
- Capacitor Required: No
Key Features:
- Application: Blowers, Fans and Air Circulators
- Duty: Continuous
- Motor Mounting Type: T-Flex
Key Features:
- Includes: Belly Band, Resilient Mounting Ring
- Body Dia.: 5 5/8 in
- Motor Thermal Protection: Auto
Key Features:
- Shaft Dia.: 1/2 in
- Bolt Circle Dia.: 4 7/16 in
- Motor Service Factor: 1
Key Features:
- Motor Mounting Type: Stud, Ring, Hole, Band
- Motor Shaft Design: Flat
- Mounting Stud Location: Shaft End
Key Features:
- Hz: 60 Hz
- Motor Enclosure Design: Open Air-Over
- Motor Shaft Design: Flat
Key Features:
- HP: 1/3
- Resilient Ring Dia.: 2 1/4 in
- Stud Size: #8-32
Key Features:
- Length Less Shaft: 8 1/4 in
- Phase: Single
- Duty: Continuous
Key Features:
- Ring to Ring Center: 6 3/4 in
- Application: Blowers, Fans and Air Circulators
- HP: 1/3
Key Features:
- Item: Direct Drive Blower Motor
- Motor Enclosure Design: Open Air-Over
- Motor Thermal Protection: Auto
Key Features:
- Motor Service Factor: 1
- Overall Length: 13 1/2 in
- Phase: Single
Key Features:
- Motor Enclosure Design: Open Air-Over
- Motor Shaft Rotation: CW/CCW
- Motor Service Factor: 1
Key Features:
- Stud Size: #8-32
- Motor Bearings: Sleeve
- Full Load Amps: 5 A
Key Features:
- Ring to Ring Center: 4 9/16 in
- Application: Blowers, Fans and Air Circulators
- Bolt Circle Dia.: 4 7/16 in
Key Features:
- Motor Bearings: Sleeve
- Application: Blowers, Fans and Air Circulators
- Motor Enclosure Design: Open Air-Over
Key Features:
- Item: 5-5/8in. Dia. Stock Motor
- Duty: Continuous
- No. of Speeds: 3
Key Features:
- Motor Thermal Protection: Auto
- Application: Room Air Conditioners, Unit Heaters, Condensers, Furnace Blowers, A Wide Range of Other Shaft Mounted Fan and Blower Equipment
- Length Less Shaft: 4 15/16 in
Key Features:
- Motor Mounting Position: All Angle
- Resilient Ring Dia.: 2 1/4 in
- Standards: CSA Certified, UL Recognized