1,000+ Results for Direct Drive Blower Motors
Key Features:
- Shaft Dia.: 1/2 in
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Motor Mounting Position: All Angle
Key Features:
- Full Load Amps: 2.6 A
- Motor Mounting Type: Stud
- HP: 1/8
Key Features:
- Item: Direct Drive Blower Motor
- Shaft Length: 6 in
- RPM Range: 1,601-1,700
Key Features:
- Resilient Ring Dia.: 2 1/4 in
- Frame: 48YZ
- Full Load Amps: 4.2 A
Key Features:
- Application: Blowers, Fans and Air Circulators
- Motor Shaft Rotation: CW/CCW
- Full Load Amps: 2.6 A
Key Features:
- Motor Enclosure Design: Open Air-Over
- Motor Bearings: Ball
- Full Load Amps: 4.0 A
Key Features:
- Motor Mounting Type: Ring
- Standards: CSA Certified, UL Recognized
- Motor Thermal Protection: Auto
Key Features:
- Frame: 48
- Motor Shaft Rotation: CW/CCW
- Ins. Class: B
Key Features:
- Shaft Dia.: 1/2 in
- Motor Sub Application: Direct Drive Fan/Blower
- Body Dia.: 5 in
Key Features:
- Stud Size: #8-32
- Motor Mounting Position: Horizontal
- Shaft Dia.: 1/2 in
Key Features:
- Shaft Length: 6 in
- Nominal Efficiency: 64.5 %
- Item: Direct Drive Blower Motor
Key Features:
- Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
- Motor Thermal Protection: Auto
- RPM Range: 1,001-1,100
Key Features:
- Motor Shaft Design: Flat
- Motor Application: HVAC/R
- Frame: 48YZ
Key Features:
- Length Less Shaft: 6 3/16 in
- Overall Length: 12 3/16 in
- Motor Sub Application: Direct Drive
Key Features:
- Full Load Amps: 13.2/7.2-6.6 A
- Nameplate RPM: 1,725
- Item: Belt Drive Motor
Key Features:
- Motor Application: HVAC/R
- No. of Speeds: 3
- Mounting Stud Pattern: 2-3/4 in x 2-3/4 in
Key Features:
- Motor Enclosure Design: Open Dripproof
- Motor Sub Application: Direct Drive Fan/Blower
- Standards: CSA Certified, UL Recognized
Key Features:
- Item: Direct Drive Blower Motor
- Stud Size: #8-32
- Motor Bearings: Sleeve
Key Features:
- Motor Shaft Design: Double-Flat
- Stud Size: #8-32
- Motor Application: HVAC/R
Key Features:
- Motor Shaft Rotation: CWLE
- Voltage Compatibility: 115/208-230V AC, 115/230V AC, 115V AC, 120/240V AC, 120V AC
- Replacement For: 4YC86
Key Features:
- Standards: CSA Certified, UL Recognized
- No. of Speeds: 1
- Ins. Class: B
Key Features:
- Motor Thermal Protection: Auto
- RPM Range: 1,001-1,100
- Motor Application: HVAC/R
Key Features:
- Max. Ambient Temp.: 40 Degrees C
- Phase: Single
- RPM Range: 1,601-1,700
Key Features:
- Shaft Length: 4 1/2 in
- RPM Range: 1,501-1,600
- Resilient Ring Dia.: 2 1/4 in
Key Features:
- Motor Shaft Design: Threaded
- Full Load Amps: 12.0/5.8-6.0 A
- Length Less Shaft: 9 7/16 in
Key Features:
- Motor Shaft Rotation: CW/CCW
- Motor Bearings: Ball
- Capacitor Required: Included
Key Features:
- Application: Air Compressor
- No. of Speeds: 1
- Max. Ambient Temp.: 60 Degrees C
Key Features:
- Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
- Nameplate RPM: 1,075
- Stud Size: #8-32
Key Features:
- Length Less Shaft: 3 in
- Motor Shaft Design: Flat
- Motor Mounting Position: All Angle
Key Features:
- Motor Thermal Protection: Auto
- Motor Application: HVAC/R
- Nameplate RPM: 1,550
Key Features:
- Length Less Shaft: 7 1/4 in
- Motor Sub Application: Direct Drive
- Hz: 60 Hz
Key Features:
- No. of Speeds: 1
- Motor Service Factor: 1
- Motor Shaft Rotation: CCWLE
Key Features:
- Application: Replacement Motor for Mfr. No. 4YC71, 5DVP8, 5DVP9, 4YC69, 16D536, 16D537
- Motor Design: Permanent Split Capacitor
- Bolt Circle Dia.: 5 1/8 in
Key Features:
- Ring to Ring Center: 7 3/8 in
- Phase: Single
- Stud Size: #10-32
Key Features:
- Shaft Dia.: 1/2 in
- Frame: 48
- Manufacturers Warranty Length: 1 yr
Key Features:
- Duty: Continuous
- Motor Enclosure Design: Open Air-Over
- Motor Thermal Protection: Auto